Numerics
- 802
- 802.1 LLDPDU TLV types, TLVs
- 802.3 LLDPDU TLV types, TLVs
- VLAN termination configuration (Dot1q ambiguous), Configuring Dot1q termination, Configuring ambiguous Dot1q termination, Ambiguous Dot1q termination configuration example
- VLAN termination configuration (Dot1q PPPoE server support), Configuration example for Dot1q termination supporting PPPoE server
- VLAN termination configuration (Dot1q unambiguous), Configuring Dot1q termination, Configuring unambiguous Dot1q termination, Unambiguous Dot1q termination configuration example
- VLAN termination configuration (QinQ ambiguous), Configuring QinQ termination, Configuring ambiguous QinQ termination, Configuring unambiguous QinQ termination , Ambiguous QinQ termination configuration example
- VLAN termination configuration (QinQ DHCP relay support), Configuration example for QinQ termination supporting DHCP relay
- VLAN termination configuration (QinQ PPPoE server support), Configuration example for QinQ termination supporting PPPoE server
- VLAN termination configuration (QinQ unambiguous), Configuring QinQ termination, Unambiguous QinQ termination configuration example
- VLAN termination configuration (untagged), Configuring untagged termination
- VLAN termination default, Configuring default termination
A
- accessing
- port-based VLAN assignment (access port), Assigning an access port to a VLAN
- adding
- MAC address table blackhole entry, Adding or modifying a blackhole MAC address entry
- MAC address table entry (global), Adding or modifying a static or dynamic MAC address entry globally
- MAC address table entry (on interface), Adding or modifying a static or dynamic MAC address entry on an interface
- address
- MAC address table learning limit, Setting the MAC learning limit on an interface
- advertising
- LLDP advertisable TLV, Configuring the advertisable TLVs
- aggregating
- link. See
- aging
- MAC address table timer, Setting the aging timer for dynamic MAC address entries
- spanning tree max age timer, Setting spanning tree timers
- algorithm
- STP calculation, Calculation process of the STP algorithm
- alternate port (MST), Port roles
- ARP
- LLDP ARP entry generation, Enabling the device to generate ARP or ND entries for received management address LLDP TLVs
- assigning
- MAC address table learning priority, Assigning MAC learning priority to interfaces
- port-based VLAN access port, Assigning an access port to a VLAN
- port-based VLAN access port (interface view), Assign an access port to a VLAN in interface view
- port-based VLAN access port (VLAN view), Assign one or multiple access ports to a VLAN in VLAN view
- port-based VLAN hybrid port, Assigning a hybrid port to a VLAN
- port-based VLAN trunk port, Assigning a trunk port to a VLAN
- attribute
- Ethernet link aggregation attribute configuration, Configuration types
B
- backing up
- MST backup port, Port roles
- bandwidth
- Ethernet link aggregate interface (expected bandwidth), Setting the expected bandwidth for an aggregate interface
- basic management LLDPDU TLV types, TLVs
- BFD
- Ethernet link aggregation group BFD, Enabling BFD for an aggregation group
- bidirectional
- forwarding detection. Use
- blackhole
- MAC address table entry, Types of MAC address entries, Adding or modifying a blackhole MAC address entry
- boundary port (MST), Port roles
- BPDU
- configuration BPDUs, Configuration BPDUs
- MST region max hops, Configuring the maximum hops of an MST region
- PVST BPDU guard, Enabling PVST BPDU guard
- spanning tree BPDU drop, Enabling BPDU drop
- spanning tree BPDU guard, Enabling BPDU guard
- spanning tree hello time, Setting spanning tree timers
- spanning tree max age timer, Setting spanning tree timers
- spanning tree TC-BPDU guard, Enabling TC-BPDU guard
- spanning tree TC-BPDU transmission restriction, Configuring TC-BPDU transmission restriction
- STP BPDU forwarding, The configuration BPDU forwarding mechanism of STP
- TCN BPDUs, TCN BPDUs
- transmission rate configuration, Configuring the BPDU transmission rate
- BPDU processing
- RSTP, RSTP BPDU processing
- bridging
- LLDP agent customer bridge, LLDP agent
- LLDP agent nearest bridge, LLDP agent
- LLDP agent non-TPMR bridge, LLDP agent
- LLDP bridge mode configuration, Setting the LLDP bridge mode
- MST common root bridge, Common root bridge
- MST regional root, Regional root
- spanning tree loop guard, Enabling loop guard
- spanning tree root bridge, Configuring the root bridge or a secondary root bridge
- spanning tree root bridge (device), Configuring the current device as the root bridge of a specific spanning tree
- spanning tree root guard, Enabling root guard
- spanning tree secondary root bridge (device), Configuring the current device as a secondary root bridge of a specific spanning tree
- STP designated bridge, Designated bridge and designated port
- STP root bridge, Root bridge
- broadcast
- VLAN termination transmission, Enabling a VLAN termination-enabled interface to transmit broadcasts and multicasts
C
- calculating
- MSTI calculation, MSTI calculation
- MSTP CIST calculation, CIST calculation
- spanning tree port path cost calculation standard, Specifying a standard for the device to use when it calculates the default path cost
- spanning tree timeout factor, Setting the timeout factor
- STP algorithm, Calculation process of the STP algorithm
- checking
- LLDP PVID inconsistency check disable, Disabling LLDP PVID inconsistency check
- spanning tree No Agreement Check, Configuring No Agreement Check, No Agreement Check configuration example
- choosing
- Ethernet link aggregation reference port, Choosing a reference port, Choosing a reference port
- CIST
- calculation, CIST calculation
- network device connection, CIST
- spanning tree max age timer, Setting spanning tree timers
- common root bridge, Common root bridge
- configuring
- Ethernet aggregate interface, Configuring an aggregate interface
- Ethernet aggregate interface (description), Configuring the description of an aggregate interface
- Ethernet aggregate interface (Layer 3 edge), Layer 3 edge aggregate interface configuration example
- Ethernet link aggregate interface (Layer 2 edge), Layer 2 edge aggregate interface configuration example
- Ethernet link aggregation, Configuring Ethernet link aggregation, Ethernet link aggregation configuration task list, Ethernet link aggregation configuration examples
- Ethernet link aggregation (Layer 2 dynamic), Layer 2 dynamic aggregation configuration example
- Ethernet link aggregation (Layer 2 static), Layer 2 static aggregation configuration example
- Ethernet link aggregation (Layer 3 dynamic), Layer 3 dynamic aggregation configuration example
- Ethernet link aggregation (Layer 3 static), Layer 3 static aggregation configuration example
- Ethernet link aggregation edge aggregate interface, Configuring an edge aggregate interface
- Ethernet link aggregation group, Configuring an aggregation group
- Ethernet link aggregation group (Layer 2 dynamic), Configuring a Layer 2 dynamic aggregation group
- Ethernet link aggregation group (Layer 2 static), Configuring a Layer 2 static aggregation group
- Ethernet link aggregation group (Layer 3 dynamic), Configuring a Layer 3 dynamic aggregation group
- Ethernet link aggregation group (Layer 3 static), Configuring a Layer 3 static aggregation group
- Ethernet link aggregation group BFD, Enabling BFD for an aggregation group
- Ethernet link aggregation group load sharing, Configuring load sharing for link aggregation groups
- Ethernet link aggregation load sharing (Layer 2), Layer 2 aggregation load sharing configuration example
- Ethernet link aggregation load sharing (Layer 3), Layer 3 aggregation load sharing configuration example
- LLDP, Configuring LLDP, LLDP configuration task list, LLDP configuration examples
- LLDP advertisable TLVs, Configuring the advertisable TLVs
- LLDP basics, Performing basic LLDP configurations, Basic LLDP configuration example
- LLDP management address, Configuring the management address and its encoding format
- LLDP management address encoding format, Configuring the management address and its encoding format
- LLDP trapping, Configuring LLDP trapping and LLDP-MED trapping
- LLDP-MED trapping, Configuring LLDP trapping and LLDP-MED trapping
- MAC address table, Configuring the MAC address table, MAC address table configuration task list, MAC address table configuration example
- MAC address table entry, Configuring MAC address entries
- MAC address table frame forwarding rule, Configuring the unknown frame forwarding rule after the MAC learning limit is reached
- MST region, Configuring an MST region
- MST region max hops, Configuring the maximum hops of an MST region
- MSTP, MSTP configuration task list, MSTP configuration example
- port-based VLAN, Configuring port-based VLANs, Port-based VLAN configuration example
- RSTP, RSTP configuration task list
- spanning tree, Configuring spanning tree protocols, Spanning tree configuration task lists, Spanning tree configuration example
- spanning tree BPDU transmission rate, Configuring the BPDU transmission rate
- spanning tree device priority, Configuring the device priority
- spanning tree Digest Snooping, Configuring Digest Snooping, Digest Snooping configuration example
- spanning tree edge port, Configuring edge ports
- spanning tree No Agreement Check, Configuring No Agreement Check, No Agreement Check configuration example
- spanning tree port link type, Configuring the port link type
- spanning tree port mode, Configuring the mode a port uses to recognize and send MSTP frames
- spanning tree port path cost, Configuring path costs of ports, Configuring path costs of ports
- spanning tree port priority, Configuring the port priority
- spanning tree port role restriction, Configuring port role restriction
- spanning tree protection features, Configuring protection features
- spanning tree root bridge, Configuring the root bridge or a secondary root bridge
- spanning tree root bridge (device), Configuring the current device as the root bridge of a specific spanning tree
- spanning tree secondary root bridge, Configuring the root bridge or a secondary root bridge
- spanning tree secondary root bridge (device), Configuring the current device as a secondary root bridge of a specific spanning tree
- spanning tree switched network diameter, Configuring the network diameter of a switched network
- spanning tree TC Snooping, Configuring TC Snooping
- spanning tree TC-BPDU transmission restriction, Configuring TC-BPDU transmission restriction
- spanning tree timeout factor, Setting the timeout factor
- spanning tree timer, Setting spanning tree timers
- STP, STP configuration task list
- VLAN, Configuring VLANs
- VLAN basic settings, Configuring basic VLAN settings
- VLAN interface, Configuring VLAN interfaces
- VLAN termination, Configuring VLAN termination, VLAN termination configuration task list, VLAN termination configuration examples
- VLAN termination (default), Configuring default termination
- VLAN termination (Dot1q ambiguous), Configuring Dot1q termination, Configuring ambiguous Dot1q termination, Ambiguous Dot1q termination configuration example
- VLAN termination (Dot1q PPPoE server support), Configuration example for Dot1q termination supporting PPPoE server
- VLAN termination (Dot1q unambiguous), Configuring Dot1q termination, Configuring unambiguous Dot1q termination, Unambiguous Dot1q termination configuration example
- VLAN termination (QinQ ambiguous), Configuring QinQ termination, Configuring ambiguous QinQ termination, Ambiguous QinQ termination configuration example
- VLAN termination (QinQ DHCP relay support), Configuration example for QinQ termination supporting DHCP relay
- VLAN termination (QinQ PPPoE server support), Configuration example for QinQ termination supporting PPPoE server
- VLAN termination (QinQ unambiguous), Configuring QinQ termination, Unambiguous QinQ termination configuration example
- VLAN termination (untagged), Configuring untagged termination
- VLAN termination configuration (QinQ unambiguous), Configuring unambiguous QinQ termination
- VLAN termination packet TPID, Configuring the TPID for VLAN-tagged packets
- cost
- spanning tree port path cost calculation standard, Specifying a standard for the device to use when it calculates the default path cost
- spanning tree port path cost configuration, Configuring path costs of ports, Configuring path costs of ports
- STP path cost, Path cost
- CST
- MST region connection, CST
- customer
- LLDP customer bridge mode, Setting the LLDP bridge mode
- CVLAN
- VLAN termination application scenario, VLAN termination application scenarios
- VLAN termination configuration, Configuring VLAN termination, VLAN termination configuration task list, VLAN termination configuration examples
D
- default
- Ethernet link aggregate interface default settings, Restoring the default settings for an aggregate interface
- VLAN default termination, VLAN termination types, Configuring default termination
- designated
- MST port, Port roles
- STP bridge, Designated bridge and designated port
- STP port, Designated bridge and designated port
- detecting
- Ethernet link aggregation group BFD, Enabling BFD for an aggregation group
- device
- LLDP basic configuration, Performing basic LLDP configurations, Basic LLDP configuration example
- LLDP configuration, Configuring LLDP, LLDP configuration task list, LLDP configuration examples
- LLDP parameters, Setting other LLDP parameters
- MSTP implementation, MSTP implementation on devices
- PVST BPDU guard, Enabling PVST BPDU guard
- SNMP notifications for new-root election and topology change events, Enabling SNMP notifications for new-root election and topology change events
- spanning tree BPDU drop, Enabling BPDU drop
- spanning tree BPDU guard, Enabling BPDU guard
- spanning tree Digest Snooping, Configuring Digest Snooping, Digest Snooping configuration example
- spanning tree loop guard, Enabling loop guard
- spanning tree No Agreement Check, Configuring No Agreement Check, No Agreement Check configuration example
- spanning tree port role restriction, Configuring port role restriction
- spanning tree priority, Configuring the device priority
- spanning tree protection features, Configuring protection features
- spanning tree root guard, Enabling root guard
- spanning tree TC Snooping, Configuring TC Snooping
- spanning tree TC-BPDU guard, Enabling TC-BPDU guard
- spanning tree TC-BPDU transmission restriction, Configuring TC-BPDU transmission restriction
- VLAN termination configuration (Dot1q PPPoE server support), Configuration example for Dot1q termination supporting PPPoE server
- VLAN termination configuration (QinQ ambiguous), Ambiguous QinQ termination configuration example
- VLAN termination configuration (QinQ DHCP relay support), Configuration example for QinQ termination supporting DHCP relay
- VLAN termination configuration (QinQ PPPoE server support), Configuration example for QinQ termination supporting PPPoE server
- VLAN termination configuration (QinQ unambiguous), Unambiguous QinQ termination configuration example
- DHCP
- VLAN termination configuration (QinQ DHCP relay support), Configuration example for QinQ termination supporting DHCP relay
- VLAN termination configuration (QinQ unambiguous), Configuring QinQ termination
- Digest Snooping (spanning tree), Configuring Digest Snooping, Digest Snooping configuration example
- directing
- Ethernet link aggregation traffic redirection, Enabling link-aggregation traffic redirection
- disabling
- LLDP PVID inconsistency check, Disabling LLDP PVID inconsistency check
- discarding
- MST discarding port state, Port states
- displaying
- Ethernet link aggregation, Displaying and maintaining Ethernet link aggregation
- LLDP, Displaying and maintaining LLDP
- MAC address table, Displaying and maintaining the MAC address table
- spanning tree, Displaying and maintaining the spanning tree
- VLAN, Displaying and maintaining VLANs
- Dot1
- VLAN termination configuration (Dot1q ambiguous), Configuring Dot1q termination, Configuring ambiguous Dot1q termination, Ambiguous Dot1q termination configuration example
- VLAN termination configuration (Dot1q PPPoE server support), Configuration example for Dot1q termination supporting PPPoE server
- VLAN termination configuration (Dot1q unambiguous), Configuring Dot1q termination, Configuring unambiguous Dot1q termination, Unambiguous Dot1q termination configuration example
- VLAN termination configuration (QinQ ambiguous), Configuring QinQ termination, Configuring ambiguous QinQ termination, Configuring unambiguous QinQ termination , Ambiguous QinQ termination configuration example
- VLAN termination configuration (QinQ DHCP relay support), Configuration example for QinQ termination supporting DHCP relay
- VLAN termination configuration (QinQ PPPoE server support), Configuration example for QinQ termination supporting PPPoE server
- VLAN termination configuration (QinQ unambiguous), Configuring QinQ termination, Unambiguous QinQ termination configuration example
- VLAN termination configuration (untagged), Configuring untagged termination
- VLAN termination default, Configuring default termination
- VLAN termination type, VLAN termination types
- dot1d-1998 (STP port path cost calculation), Specifying a standard for the device to use when it calculates the default path cost
- dot1s (STP port mode), Configuring the mode a port uses to recognize and send MSTP frames
- dot1t (STP port path cost calculation), Specifying a standard for the device to use when it calculates the default path cost
- dynamic
- Ethernet link aggregation (Layer 2), Layer 2 dynamic aggregation configuration example
- Ethernet link aggregation (Layer 3), Layer 3 dynamic aggregation configuration example
- Ethernet link aggregation edge aggregate interface, Edge aggregate interface
- Ethernet link aggregation group, Configuring a Layer 2 aggregation group, Configuring a Layer 3 aggregation group
- Ethernet link aggregation mode, Link aggregation modes
- Layer 2 Ethernet link aggregation group, Configuring a Layer 2 dynamic aggregation group
- Layer 3 Ethernet link aggregation group, Configuring a Layer 3 dynamic aggregation group
- MAC address table dynamic aging timer, Setting the aging timer for dynamic MAC address entries
- MAC address table entry, Types of MAC address entries
- MAC address table entry configuration (global), Adding or modifying a static or dynamic MAC address entry globally
- MAC address table entry configuration (on interface), Adding or modifying a static or dynamic MAC address entry on an interface
E
- edge
- Ethernet aggregate interface (Layer 3 edge), Layer 3 edge aggregate interface configuration example
- Ethernet link aggregate interface (Layer 2 edge), Layer 2 edge aggregate interface configuration example
- edge port
- MST, Port roles
- spanning tree, Configuring edge ports
- edge port rapid transition
- rapid transition mechanism, Edge port rapid transition
- enabling
- Ethernet link aggregation traffic redirection, Enabling link-aggregation traffic redirection
- LLDP, Enabling LLDP
- LLDP ARP entry generation, Enabling the device to generate ARP or ND entries for received management address LLDP TLVs
- LLDP ND entry generation, Enabling the device to generate ARP or ND entries for received management address LLDP TLVs
- LLDP polling, Enabling LLDP polling
- PVST BPDU guard, Enabling PVST BPDU guard
- SNMP notifications for new-root election and topology change events, Enabling SNMP notifications for new-root election and topology change events
- spanning tree BPDU drop, Enabling BPDU drop
- spanning tree BPDU guard, Enabling BPDU guard
- spanning tree feature, Enabling the spanning tree feature
- spanning tree loop guard, Enabling loop guard
- spanning tree port state transition information output, Enabling outputting port state transition information
- spanning tree root guard, Enabling root guard
- spanning tree TC-BPDU guard, Enabling TC-BPDU guard
- VLAN termination interface broadcast transmission, Enabling a VLAN termination-enabled interface to transmit broadcasts and multicasts
- VLAN termination interface multicast transmission, Enabling a VLAN termination-enabled interface to transmit broadcasts and multicasts
- encapsulating
- LLDP frame encapsulation (Ethernet II), LLDP frame formats
- LLDP frame encapsulation (SNAP), LLDP frame formats
- LLDP frame encapsulation format, Setting an encapsulation format for LLDP frames
- VLAN frame encapsulation, VLAN frame encapsulation
- Ethernet
- ARP entry generation, Enabling the device to generate ARP or ND entries for received management address LLDP TLVs
- link aggregation. See
- LLDP frame encapsulation, LLDP frame formats
- LLDP trapping, Configuring LLDP trapping and LLDP-MED trapping
- LLDP-MED trapping, Configuring LLDP trapping and LLDP-MED trapping
- MAC address table configuration, Configuring the MAC address table, MAC address table configuration task list, MAC address table configuration example
- ND entry generation, Enabling the device to generate ARP or ND entries for received management address LLDP TLVs
- port-based VLAN assignment (access port), Assigning an access port to a VLAN
- port-based VLAN assignment (hybrid port), Assigning a hybrid port to a VLAN
- port-based VLAN assignment (trunk port), Assigning a trunk port to a VLAN
- port-based VLAN configuration, Configuring port-based VLANs
- VLAN basic configuration, Configuring basic VLAN settings
- VLAN configuration, Configuring VLANs
- VLAN frame encapsulation, VLAN frame encapsulation
- VLAN interface, Configuring VLAN interfaces
- VLAN port-based configuration, Port-based VLAN configuration example
- Ethernet link aggregation
- aggregate group Selected ports min/max, Setting the minimum and maximum numbers of Selected ports for an aggregation group
- aggregate interface, Aggregation group, member port, and aggregate interface
- aggregate interface (description), Configuring the description of an aggregate interface
- aggregate interface configuration, Configuring an aggregate interface
- aggregate interface default settings, Restoring the default settings for an aggregate interface
- aggregate interface shutdown, Shutting down an aggregate interface
- aggregation group, Aggregation group, member port, and aggregate interface
- aggregation group restrictions, Configuration restrictions and guidelines
- configuration, Configuring Ethernet link aggregation, Ethernet link aggregation configuration task list, Ethernet link aggregation configuration examples
- configuration types, Configuration types
- display, Displaying and maintaining Ethernet link aggregation
- edge aggregate interface, Edge aggregate interface, Configuring an edge aggregate interface
- group (Layer 3 dynamic), Configuring a Layer 3 dynamic aggregation group
- group (Layer 3 static), Configuring a Layer 3 static aggregation group
- group configuration, Configuring an aggregation group
- group configuration (Layer 2), Configuring a Layer 2 aggregation group
- group configuration (Layer 3), Configuring a Layer 3 aggregation group
- group load sharing configuration, Configuring load sharing for link aggregation groups
- group load sharing mode, Setting load sharing modes for link aggregation groups
- how dynamic link aggregation works, How dynamic link aggregation works
- interface configuration (expected bandwidth), Setting the expected bandwidth for an aggregate interface
- LACP, LACP
- Layer 2 aggregate interface (ignored VLAN), Specifying ignored VLANs for a Layer 2 aggregate interface, Specifying ignored VLANs for a Layer 2 aggregate interface
- Layer 2 aggregate interface (Layer 2 edge), Layer 2 edge aggregate interface configuration example
- Layer 2 aggregation configuration (dynamic), Layer 2 dynamic aggregation configuration example
- Layer 2 aggregation configuration (static), Layer 2 static aggregation configuration example
- Layer 2 aggregation load sharing (Layer 2), Layer 2 aggregation load sharing configuration example
- Layer 2 group (dynamic), Configuring a Layer 2 dynamic aggregation group
- Layer 2 group (static), Configuring a Layer 2 static aggregation group
- Layer 3 aggregate interface (Layer 3 edge), Layer 3 edge aggregate interface configuration example
- Layer 3 aggregate interface configuration (MTU), Setting the MTU for a Layer 3 aggregate interface
- Layer 3 aggregate interface traffic processing slot, Specifying a traffic processing slot for a Layer 3 aggregate interface
- Layer 3 aggregation configuration (dynamic), Layer 3 dynamic aggregation configuration example
- Layer 3 aggregation configuration (static), Layer 3 static aggregation configuration example
- Layer 3 aggregation configuration load sharing, Layer 3 aggregation load sharing configuration example
- load sharing mode, Load sharing modes for link aggregation groups
- local-first load sharing, Enabling local-first load sharing for link aggregation
- maintain, Displaying and maintaining Ethernet link aggregation
- member port, Aggregation group, member port, and aggregate interface
- member port state, Aggregation states of member ports in an aggregation group, Setting the aggregation state of each member port, Setting the aggregation state of each member port
- modes, Link aggregation modes
- operational key, Operational key
- reference port, Choosing a reference port
- reference port choice, Choosing a reference port
- static mode, How static link aggregation works
- traffic redirection, Enabling link-aggregation traffic redirection
- traffic redirection restrictions, Configuration restrictions and guidelines
- Ethernet link aggregation group
- BFD configuration, Enabling BFD for an aggregation group
F
- feature and hardware compatibility
- LLDP, Feature and hardware compatibility
- format
- LLDP frame encapsulation (Ethernet II), LLDP frame formats
- LLDP frame encapsulation (SNAP), LLDP frame formats
- LLDP frame encapsulation format, Setting an encapsulation format for LLDP frames
- LLDP management address encoding format, Configuring the management address and its encoding format
- forwarding
- MAC address table frame forwarding rule, Configuring the unknown frame forwarding rule after the MAC learning limit is reached
- MST forwarding port state, Port states
- spanning tree forward delay timer, Setting spanning tree timers
- STP BPDU forwarding, The configuration BPDU forwarding mechanism of STP
- STP forward delay timer, STP timers
- frame
- LLDP ARP entry generation, Enabling the device to generate ARP or ND entries for received management address LLDP TLVs
- LLDP frame encapsulation format, Setting an encapsulation format for LLDP frames
- LLDP ND entry generation, Enabling the device to generate ARP or ND entries for received management address LLDP TLVs
- LLDP source MAC address, Setting the source MAC address of LLDP frames to the MAC address of the subinterface associated with the specified VLAN
- MAC address learning, MAC address learning
- MAC address table blackhole entry, Adding or modifying a blackhole MAC address entry
- MAC address table configuration, Configuring the MAC address table, MAC address table configuration task list, MAC address table configuration example
- MAC address table entry configuration, Configuring MAC address entries
- MAC address table frame forwarding rule, Configuring the unknown frame forwarding rule after the MAC learning limit is reached
- MSTP BPDU protocol frames, MSTP protocol frames
- port-based VLAN frame handling, How ports of different link types handle frames
- RSTP BPDU protocol frames, RSTP protocol frames
- spanning tree port mode configuration, Configuring the mode a port uses to recognize and send MSTP frames
- STP BPDU protocol frames, STP protocol frames
- STP TCN BPDU protocol frames, STP protocol frames
- VLAN frame encapsulation, VLAN frame encapsulation
G
- global
- Ethernet link aggregation load sharing mode set, Setting the global link-aggregation load sharing mode
- group
- Ethernet link aggregate group Selected ports min/max, Setting the minimum and maximum numbers of Selected ports for an aggregation group
- Ethernet link aggregation, Configuring an aggregation group
- Ethernet link aggregation group, Aggregation group, member port, and aggregate interface
- Ethernet link aggregation group (Layer 2 static), Configuring a Layer 2 static aggregation group, Configuring a Layer 2 dynamic aggregation group
- Ethernet link aggregation group (Layer 2), Configuring a Layer 2 aggregation group
- Ethernet link aggregation group (Layer 3 dynamic), Configuring a Layer 3 dynamic aggregation group
- Ethernet link aggregation group (Layer 3 static), Configuring a Layer 3 static aggregation group
- Ethernet link aggregation group (Layer 3), Configuring a Layer 3 aggregation group
- Ethernet link aggregation group load sharing, Configuring load sharing for link aggregation groups
- Ethernet link aggregation LACP, LACP
- Ethernet link aggregation load sharing mode, Load sharing modes for link aggregation groups, Setting load sharing modes for link aggregation groups
- Ethernet link aggregation member port state, Aggregation states of member ports in an aggregation group
I
- ignored VLAN
- Layer 2 aggregate interface, Specifying ignored VLANs for a Layer 2 aggregate interface
- implementing
- MSTP device implementation, MSTP implementation on devices
- inconsistency check (LLDP), Disabling LLDP PVID inconsistency check
- interface
- Ethernet aggregate interface, Configuring an aggregate interface
- Ethernet aggregate interface (description), Configuring the description of an aggregate interface
- Ethernet link aggregate interface default settings, Restoring the default settings for an aggregate interface
- Ethernet link aggregate interface shutdown, Shutting down an aggregate interface
- Ethernet link aggregation edge aggregate interface, Edge aggregate interface, Configuring an edge aggregate interface
- Layer 2 Ethernet aggregate interface (ignored VLAN), Specifying ignored VLANs for a Layer 2 aggregate interface
- Layer 3 aggregate interface configuration (MTU), Setting the MTU for a Layer 3 aggregate interface
- Layer 3 aggregate traffic processing slot, Specifying a traffic processing slot for a Layer 3 aggregate interface
- interval
- Ethernet link aggregation LACP long timeout, LACP timeout interval
- Ethernet link aggregation LACP short timeout, LACP timeout interval
- IPv4
- VLAN termination configuration (QinQ unambiguous), Configuring QinQ termination
- IST
- MST region, IST
L
- LACP
- Ethernet link aggregation, LACP
- LAN
- Virtual Local Area Network. Use
- LAN switching
- Ethernet aggregate interface, Configuring an aggregate interface
- Ethernet aggregate interface (description), Configuring the description of an aggregate interface
- Ethernet aggregate interface (ignored VLAN), Specifying ignored VLANs for a Layer 2 aggregate interface
- Ethernet aggregate interface (Layer 3 edge), Layer 3 edge aggregate interface configuration example
- Ethernet link aggregate group Selected ports min/max, Setting the minimum and maximum numbers of Selected ports for an aggregation group
- Ethernet link aggregate interface (expected bandwidth), Setting the expected bandwidth for an aggregate interface
- Ethernet link aggregate interface (Layer 2 edge), Layer 2 edge aggregate interface configuration example
- Ethernet link aggregate interface default settings, Restoring the default settings for an aggregate interface
- Ethernet link aggregate interface shutdown, Shutting down an aggregate interface
- Ethernet link aggregation (Layer 2 dynamic), Layer 2 dynamic aggregation configuration example
- Ethernet link aggregation (Layer 2 static), Layer 2 static aggregation configuration example
- Ethernet link aggregation (Layer 3 dynamic), Layer 3 dynamic aggregation configuration example
- Ethernet link aggregation (Layer 3 static), Layer 3 static aggregation configuration example
- Ethernet link aggregation (static mode), How static link aggregation works
- Ethernet link aggregation configuration, Configuring Ethernet link aggregation, Ethernet link aggregation configuration task list, Ethernet link aggregation configuration examples
- Ethernet link aggregation display, Displaying and maintaining Ethernet link aggregation
- Ethernet link aggregation edge aggregate interface, Edge aggregate interface, Configuring an edge aggregate interface
- Ethernet link aggregation group, Configuring an aggregation group
- Ethernet link aggregation group (dynamic dynamic), Configuring a Layer 2 dynamic aggregation group
- Ethernet link aggregation group (Layer 2 static), Configuring a Layer 2 static aggregation group
- Ethernet link aggregation group (Layer 2), Configuring a Layer 2 aggregation group
- Ethernet link aggregation group (Layer 3 dynamic), Configuring a Layer 3 dynamic aggregation group
- Ethernet link aggregation group (Layer 3 static), Configuring a Layer 3 static aggregation group
- Ethernet link aggregation group load sharing, Configuring load sharing for link aggregation groups
- Ethernet link aggregation group load sharing mode, Setting load sharing modes for link aggregation groups
- Ethernet link aggregation group restrictions, Configuration restrictions and guidelines
- Ethernet link aggregation LACP, LACP
- Ethernet link aggregation load sharing (Layer 2), Layer 2 aggregation load sharing configuration example
- Ethernet link aggregation load sharing (Layer 3), Layer 3 aggregation load sharing configuration example
- Ethernet link aggregation load sharing mode, Load sharing modes for link aggregation groups
- Ethernet link aggregation local-first load sharing, Enabling local-first load sharing for link aggregation
- Ethernet link aggregation maintain, Displaying and maintaining Ethernet link aggregation
- Ethernet link aggregation traffic redirection, Enabling link-aggregation traffic redirection
- Ethernet link aggregation traffic redirection restrictions, Configuration restrictions and guidelines
- Layer 3 aggregate interface traffic processing slot, Specifying a traffic processing slot for a Layer 3 aggregate interface
- LLDP basic concepts, Basic concepts
- LLDP basic configuration, Performing basic LLDP configurations, Basic LLDP configuration example
- LLDP configuration, Configuring LLDP, LLDP configuration task list, LLDP configuration examples
- LLDP display, Displaying and maintaining LLDP
- LLDP protocols and standards, Protocols and standards
- LLDP PVID inconsistency check disable, Disabling LLDP PVID inconsistency check
- MAC address table configuration, Configuring the MAC address table, MAC address table configuration task list, MAC address table configuration example
- port-based VLAN assignment (access port), Assigning an access port to a VLAN
- port-based VLAN assignment (hybrid port), Assigning a hybrid port to a VLAN
- port-based VLAN assignment (trunk port), Assigning a trunk port to a VLAN
- port-based VLAN configuration, Configuring port-based VLANs
- VLAN basic configuration, Configuring basic VLAN settings
- VLAN configuration, Configuring VLANs
- VLAN display, Displaying and maintaining VLANs
- VLAN interface, Configuring VLAN interfaces
- VLAN maintain, Displaying and maintaining VLANs
- VLAN port-based configuration, Port-based VLAN configuration example
- VLAN protocols and standards, Protocols and standards
- VLAN termination configuration, Configuring VLAN termination, VLAN termination configuration task list, VLAN termination configuration examples
- VLAN termination configuration (Dot1q ambiguous), Ambiguous Dot1q termination configuration example
- VLAN termination configuration (Dot1q PPPoE server support), Configuration example for Dot1q termination supporting PPPoE server
- VLAN termination configuration (Dot1q unambiguous), Unambiguous Dot1q termination configuration example
- VLAN termination configuration (Dot1q), Configuring Dot1q termination
- VLAN termination configuration (QinQ ambiguous), Ambiguous QinQ termination configuration example
- VLAN termination configuration (QinQ DHCP relay support), Configuration example for QinQ termination supporting DHCP relay
- VLAN termination configuration (QinQ PPPoE server support), Configuration example for QinQ termination supporting PPPoE server
- VLAN termination configuration (QinQ unambiguous), Unambiguous QinQ termination configuration example
- VLAN termination configuration (QinQ), Configuring QinQ termination
- VLAN termination configuration (untagged), Configuring untagged termination
- VLAN termination configuration restrictions, Configuration restrictions and guidelines
- VLAN termination default, Configuring default termination
- VLAN termination packet TPID, Configuring the TPID for VLAN-tagged packets
- Layer 2
- Ethernet link aggregate interface (Layer 2 edge), Layer 2 edge aggregate interface configuration example
- Ethernet link aggregation (Layer 2 dynamic), Layer 2 dynamic aggregation configuration example
- Ethernet link aggregation (Layer 2 static), Layer 2 static aggregation configuration example
- Ethernet link aggregation load sharing, Layer 2 aggregation load sharing configuration example
- LLDP basic configuration, Basic LLDP configuration example
- LLDP configuration, LLDP configuration examples
- LLDP trapping, Configuring LLDP trapping and LLDP-MED trapping
- LLDP-MED trapping, Configuring LLDP trapping and LLDP-MED trapping
- VLAN basic configuration, Configuring basic VLAN settings
- VLAN configuration, Configuring VLANs
- Layer 2 LAN switching
- displaying spanning tree, Displaying and maintaining the spanning tree
- maintaining spanning tree, Displaying and maintaining the spanning tree
- MST region, Configuring an MST region
- MSTP configuration, MSTP configuration example
- spanning tree configuration, Configuring spanning tree protocols, Spanning tree configuration example
- spanning tree Digest Snooping, Configuring Digest Snooping, Digest Snooping configuration example
- Layer 3
- aggregate interface configuration (MTU), Setting the MTU for a Layer 3 aggregate interface
- Ethernet aggregate interface, Configuring an aggregate interface
- Ethernet aggregate interface (description), Configuring the description of an aggregate interface
- Ethernet aggregate interface (Layer 3 edge), Layer 3 edge aggregate interface configuration example
- Ethernet link aggregate group Selected ports min/max, Setting the minimum and maximum numbers of Selected ports for an aggregation group
- Ethernet link aggregate interface (expected bandwidth), Setting the expected bandwidth for an aggregate interface
- Ethernet link aggregate interface default settings, Restoring the default settings for an aggregate interface
- Ethernet link aggregate interface shutdown, Shutting down an aggregate interface
- Ethernet link aggregation (Layer 3 dynamic), Layer 3 dynamic aggregation configuration example
- Ethernet link aggregation (Layer 3 static), Layer 3 static aggregation configuration example
- Ethernet link aggregation configuration, Configuring Ethernet link aggregation, Ethernet link aggregation configuration task list, Ethernet link aggregation configuration examples
- Ethernet link aggregation edge aggregate interface, Edge aggregate interface, Configuring an edge aggregate interface
- Ethernet link aggregation group, Configuring an aggregation group, Configuring a Layer 3 aggregation group
- Ethernet link aggregation group load sharing, Configuring load sharing for link aggregation groups
- Ethernet link aggregation group load sharing mode, Setting load sharing modes for link aggregation groups
- Ethernet link aggregation load sharing, Layer 3 aggregation load sharing configuration example
- Ethernet link aggregation local-first load sharing, Enabling local-first load sharing for link aggregation
- Ethernet link aggregation traffic redirection, Enabling link-aggregation traffic redirection
- LAN switching LAN switching VLAN interface, Configuring VLAN interfaces
- LLDP ARP entry generation, Enabling the device to generate ARP or ND entries for received management address LLDP TLVs
- LLDP basic configuration, Basic LLDP configuration example
- LLDP configuration, LLDP configuration examples
- LLDP ND entry generation, Enabling the device to generate ARP or ND entries for received management address LLDP TLVs
- LLDP trapping, Configuring LLDP trapping and LLDP-MED trapping
- LLDP-MED trapping, Configuring LLDP trapping and LLDP-MED trapping
- port-based VLAN assignment (access port), Assigning an access port to a VLAN
- port-based VLAN assignment (hybrid port), Assigning a hybrid port to a VLAN
- port-based VLAN assignment (trunk port), Assigning a trunk port to a VLAN
- port-based VLAN configuration, Configuring port-based VLANs
- learning
- MAC address, MAC address learning
- MAC address table learning limit, Setting the MAC learning limit on an interface
- MAC address table learning priority, Assigning MAC learning priority to interfaces
- MST learning port state, Port states
- legacy
- spanning tree port mode, Configuring the mode a port uses to recognize and send MSTP frames
- spanning tree port path cost calculation, Specifying a standard for the device to use when it calculates the default path cost
- link
- aggregation. See
- Ethernet link aggregation group BFD, Enabling BFD for an aggregation group
- Link Layer Discovery Protocol. Use
- MSTP configuration, MSTP configuration example
- spanning tree configuration, Configuring spanning tree protocols, Spanning tree configuration task lists, Spanning tree configuration example
- spanning tree hello time, Setting spanning tree timers
- spanning tree port link type configuration, Configuring the port link type
- link aggregation
- Ethernet link aggregation. See
- LLDP
- advertisable TLV configuration, Configuring the advertisable TLVs
- agent, LLDP agent
- ARP entry generation, Enabling the device to generate ARP or ND entries for received management address LLDP TLVs
- basic concepts, Basic concepts
- basic configuration, Performing basic LLDP configurations, Basic LLDP configuration example
- bridge mode configuration, Setting the LLDP bridge mode
- configuration, Configuring LLDP, Feature and hardware compatibility, LLDP configuration task list, LLDP configuration examples
- display, Displaying and maintaining LLDP
- enable, Enabling LLDP
- feature and hardware compatibility, Feature and hardware compatibility
- frame encapsulation (Ethernet II), LLDP frame formats
- frame encapsulation (SNAP), LLDP frame formats
- frame encapsulation format, Setting an encapsulation format for LLDP frames
- frame format, LLDP frame formats
- frame reception, Receiving LLDP frames
- frame transmission, Transmitting LLDP frames
- how it works, Working mechanism
- LLDPDU management address TLV, Management address
- LLDPDU TLV types, TLVs
- LLDPDU TLVs, LLDPDUs
- LLDP-MED trapping configuration, Configuring LLDP trapping and LLDP-MED trapping
- management address configuration, Configuring the management address and its encoding format
- management address encoding format, Configuring the management address and its encoding format
- ND entry generation, Enabling the device to generate ARP or ND entries for received management address LLDP TLVs
- operating mode (disable), LLDP operating modes
- operating mode (Rx), LLDP operating modes
- operating mode (Tx), LLDP operating modes
- operating mode (TxRx), LLDP operating modes
- operating mode set, Setting the LLDP operating mode
- parameter set, Setting other LLDP parameters
- polling enable, Enabling LLDP polling
- protocols and standards, Protocols and standards
- PVID inconsistency check disable, Disabling LLDP PVID inconsistency check
- reinitialization delay, Setting the LLDP reinitialization delay
- source MAC address, Setting the source MAC address of LLDP frames to the MAC address of the subinterface associated with the specified VLAN
- trapping configuration, Configuring LLDP trapping and LLDP-MED trapping
- LLDPDU
- LLDP basic configuration, Performing basic LLDP configurations, Basic LLDP configuration example
- LLDP configuration, Configuring LLDP, LLDP configuration task list, LLDP configuration examples
- LLDP parameters, Setting other LLDP parameters
- management address configuration, Configuring the management address and its encoding format
- management address encoding format, Configuring the management address and its encoding format
- management address TLV, Management address
- TLV basic management types, TLVs
- TLV LLDP-MED types, TLVs
- TLV organization-specific types, TLVs
- load sharing
- Ethernet link aggregation group configuration, Configuring load sharing for link aggregation groups
- Ethernet link aggregation group load sharing, Load sharing modes for link aggregation groups
- Ethernet link aggregation load sharing (Layer 2), Layer 2 aggregation load sharing configuration example
- Ethernet link aggregation load sharing (Layer 3), Layer 3 aggregation load sharing configuration example
- Ethernet link aggregation load sharing mode, Setting load sharing modes for link aggregation groups
- Ethernet link aggregation local-first load sharing, Enabling local-first load sharing for link aggregation
- Ethernet link aggregation packet type-based load sharing, Load sharing modes for link aggregation groups
- Ethernet link aggregation per-flow load sharing, Load sharing modes for link aggregation groups
- Ethernet link aggregation per-packet load sharing, Load sharing modes for link aggregation groups
- local
- Ethernet link aggregation local-first load sharing, Enabling local-first load sharing for link aggregation
- loop
- MSTP configuration, MSTP configuration example
- spanning tree configuration, Configuring spanning tree protocols, Spanning tree configuration task lists, Spanning tree configuration example
- spanning tree loop guard, Enabling loop guard
M
- MAC address table
- address learning, MAC address learning
- blackhole entry, Adding or modifying a blackhole MAC address entry
- configuration, Configuring the MAC address table, MAC address table configuration task list, MAC address table configuration example
- display, Displaying and maintaining the MAC address table
- dynamic aging timer, Setting the aging timer for dynamic MAC address entries
- entry configuration, Configuring MAC address entries
- entry configuration (global), Adding or modifying a static or dynamic MAC address entry globally
- entry configuration (on interface), Adding or modifying a static or dynamic MAC address entry on an interface
- entry creation, How a MAC address entry is created
- entry types, Types of MAC address entries
- frame forwarding rule, Configuring the unknown frame forwarding rule after the MAC learning limit is reached
- learning limit set, Setting the MAC learning limit on an interface
- learning priority assignment, Assigning MAC learning priority to interfaces
- manual entries, Manually configuring MAC address entries
- MAC addressing
- LLDP source MAC address, Setting the source MAC address of LLDP frames to the MAC address of the subinterface associated with the specified VLAN
- VLAN frame encapsulation, VLAN frame encapsulation
- MAC relay (LLDP agent), LLDP agent
- maintaining
- Ethernet link aggregation, Displaying and maintaining Ethernet link aggregation
- spanning tree, Displaying and maintaining the spanning tree
- VLAN, Displaying and maintaining VLANs
- management address
- LLDP encoding format, Configuring the management address and its encoding format
- mapping
- MSTP VLAN-to-instance mapping table, VLAN-to-instance mapping table
- master
- MSTP master port, Port roles
- max age timer (STP), STP timers
- mCheck
- global performance, Performing mCheck globally
- interface view performance, Performing mCheck in interface view
- spanning tree, Performing mCheck
- MED (LLDP-MED trapping), Configuring LLDP trapping and LLDP-MED trapping
- MIB
- LLDP basic configuration, Performing basic LLDP configurations, Basic LLDP configuration example
- LLDP configuration, Configuring LLDP, LLDP configuration task list, LLDP configuration examples
- mode
- Ethernet link aggregation dynamic, Link aggregation modes
- Ethernet link aggregation LACP operation active, LACP operating modes
- Ethernet link aggregation LACP operation passive, LACP operating modes
- Ethernet link aggregation load sharing, Load sharing modes for link aggregation groups
- Ethernet link aggregation static, Link aggregation modes, How static link aggregation works
- LLDP customer bridge, Setting the LLDP bridge mode
- LLDP disable, LLDP operating modes, Setting the LLDP operating mode
- LLDP Rx, LLDP operating modes, Setting the LLDP operating mode
- LLDP service bridge, Setting the LLDP bridge mode
- LLDP Tx, LLDP operating modes, Setting the LLDP operating mode
- LLDP TxRx, LLDP operating modes, Setting the LLDP operating mode
- spanning tree mCheck, Performing mCheck
- spanning tree MSTP, Setting the spanning tree mode
- spanning tree PVST, Setting the spanning tree mode
- spanning tree RSTP, Setting the spanning tree mode
- spanning tree STP, Setting the spanning tree mode
- modifying
- MAC address table blackhole entry, Adding or modifying a blackhole MAC address entry
- MAC address table entry (global), Adding or modifying a static or dynamic MAC address entry globally
- MAC address table entry (on interface), Adding or modifying a static or dynamic MAC address entry on an interface
- MPLS
- VLAN termination configuration (QinQ unambiguous), Configuring QinQ termination
- MST
- region max hops, Configuring the maximum hops of an MST region
- MSTI
- calculation, MSTI calculation
- MST instance, MSTI
- MSTP, Configuring spanning tree protocols, See also
- basic concepts, MSTP basic concepts
- CIST, CIST
- CIST calculation, CIST calculation
- common root bridge, Common root bridge
- configuration, MSTP configuration task list, MSTP configuration example
- CST, CST
- device implementation, MSTP implementation on devices
- feature enable, Enabling the spanning tree feature in STP/RSTP/MSTP mode
- features, MSTP features
- how it works, How MSTP works
- IST, IST
- mode set, Setting the spanning tree mode
- MST region, MST region
- MST region configuration, Configuring an MST region
- MSTI, MSTI
- MSTI calculation, MSTI calculation
- port roles, Port roles
- port states, Port states
- protocol frames, MSTP protocol frames
- protocols and standards, Protocols and standards
- rapid transition mechanism, Rapid transition mechanism
- regional root, Regional root
- relationships, MSTP
- spanning tree max age timer, Setting spanning tree timers
- spanning tree port mode configuration, Configuring the mode a port uses to recognize and send MSTP frames
- VLAN-to-instance mapping table, VLAN-to-instance mapping table
- MTU
- Layer 3 Ethernet aggregate interface, Setting the MTU for a Layer 3 aggregate interface
- multicast
- VLAN termination transmission, Enabling a VLAN termination-enabled interface to transmit broadcasts and multicasts
- Multiple Spanning Tree Protocol. Use
N
- network
- Ethernet aggregate interface (Layer 3 edge), Layer 3 edge aggregate interface configuration example
- Ethernet link aggregate interface (Layer 2 edge), Layer 2 edge aggregate interface configuration example
- Ethernet link aggregation (Layer 2 dynamic), Layer 2 dynamic aggregation configuration example
- Ethernet link aggregation (Layer 2 static), Layer 2 static aggregation configuration example
- Ethernet link aggregation (Layer 3 dynamic), Layer 3 dynamic aggregation configuration example
- Ethernet link aggregation (Layer 3 static), Layer 3 static aggregation configuration example
- Ethernet link aggregation (static mode), How static link aggregation works
- Ethernet link aggregation configuration types, Configuration types
- Ethernet link aggregation edge aggregate interface, Edge aggregate interface
- Ethernet link aggregation LACP, LACP
- Ethernet link aggregation load sharing (Layer 2), Layer 2 aggregation load sharing configuration example
- Ethernet link aggregation load sharing (Layer 3), Layer 3 aggregation load sharing configuration example
- Ethernet link aggregation member port state, Setting the aggregation state of each member port, Setting the aggregation state of each member port
- Ethernet link aggregation modes, Link aggregation modes
- Ethernet link aggregation operational key, Operational key
- Ethernet link aggregation reference port, Choosing a reference port
- Ethernet link aggregation reference port choice, Choosing a reference port
- LLDP basic configuration, Performing basic LLDP configurations, Basic LLDP configuration example
- LLDP source MAC address, Setting the source MAC address of LLDP frames to the MAC address of the subinterface associated with the specified VLAN
- MAC address table blackhole entry, Adding or modifying a blackhole MAC address entry
- MAC address table dynamic aging timer, Setting the aging timer for dynamic MAC address entries
- MAC address table entry configuration, Configuring MAC address entries
- MAC address table entry types, Types of MAC address entries
- MAC address table learning limit, Setting the MAC learning limit on an interface
- MAC address table learning priority, Assigning MAC learning priority to interfaces
- MST region configuration, Configuring an MST region
- port-based VLAN assignment (access port), Assigning an access port to a VLAN
- port-based VLAN assignment (hybrid port), Assigning a hybrid port to a VLAN
- port-based VLAN assignment (trunk port), Assigning a trunk port to a VLAN
- port-based VLAN configuration, Configuring port-based VLANs
- PVST BPDU guard, Enabling PVST BPDU guard
- RSTP network convergence, RSTP
- RSTP port role, Port roles
- RSTP port state, Port states
- SNMP notifications for new-root election and topology change events, Enabling SNMP notifications for new-root election and topology change events
- spanning tree BPDU drop, Enabling BPDU drop
- spanning tree BPDU guard, Enabling BPDU guard
- spanning tree BPDU transmission rate, Configuring the BPDU transmission rate
- spanning tree Digest Snooping, Configuring Digest Snooping, Digest Snooping configuration example
- spanning tree edge port, Configuring edge ports
- spanning tree loop guard, Enabling loop guard
- spanning tree mode set, Setting the spanning tree mode
- spanning tree No Agreement Check, Configuring No Agreement Check, No Agreement Check configuration example
- spanning tree port link type, Configuring the port link type
- spanning tree port mode, Configuring the mode a port uses to recognize and send MSTP frames
- spanning tree port path cost, Configuring path costs of ports, Configuring path costs of ports
- spanning tree port priority, Configuring the port priority
- spanning tree port role restriction, Configuring port role restriction
- spanning tree port state transition, Enabling outputting port state transition information
- spanning tree priority, Configuring the device priority
- spanning tree protection features, Configuring protection features
- spanning tree root bridge, Configuring the root bridge or a secondary root bridge
- spanning tree root bridge (device), Configuring the current device as the root bridge of a specific spanning tree
- spanning tree root guard, Enabling root guard
- spanning tree secondary root bridge (device), Configuring the current device as a secondary root bridge of a specific spanning tree
- spanning tree switched network diameter, Configuring the network diameter of a switched network
- spanning tree TC Snooping, Configuring TC Snooping
- spanning tree TC-BPDU guard, Enabling TC-BPDU guard
- spanning tree TC-BPDU transmission restriction, Configuring TC-BPDU transmission restriction
- STP algorithm calculation, Calculation process of the STP algorithm
- STP designated bridge, Designated bridge and designated port
- STP designated port, Designated bridge and designated port
- STP path cost, Path cost
- STP port state, Port states
- STP root bridge, Root bridge
- STP root port, Root port
- VLAN basic configuration, Configuring basic VLAN settings
- VLAN interface, Configuring VLAN interfaces
- VLAN port-based configuration, Port-based VLAN configuration example
- VLAN termination application scenario, VLAN termination application scenarios
- VLAN termination configuration (Dot1q ambiguous), Configuring ambiguous Dot1q termination, Ambiguous Dot1q termination configuration example
- VLAN termination configuration (Dot1q PPPoE server support), Configuration example for Dot1q termination supporting PPPoE server
- VLAN termination configuration (Dot1q unambiguous), Configuring unambiguous Dot1q termination, Unambiguous Dot1q termination configuration example
- VLAN termination configuration (Dot1q), Configuring Dot1q termination
- VLAN termination configuration (QinQ ambiguous), Configuring ambiguous QinQ termination, Ambiguous QinQ termination configuration example
- VLAN termination configuration (QinQ DHCP relay support), Configuration example for QinQ termination supporting DHCP relay
- VLAN termination configuration (QinQ PPPoE server support), Configuration example for QinQ termination supporting PPPoE server
- VLAN termination configuration (QinQ unambiguous), Configuring unambiguous QinQ termination , Unambiguous QinQ termination configuration example
- VLAN termination configuration (QinQ), Configuring QinQ termination
- VLAN termination configuration (untagged), Configuring untagged termination
- VLAN termination default, Configuring default termination
- VLAN termination interface broadcast transmission, Enabling a VLAN termination-enabled interface to transmit broadcasts and multicasts
- VLAN termination interface multicast transmission, Enabling a VLAN termination-enabled interface to transmit broadcasts and multicasts
- VLAN termination packet TPID, Configuring the TPID for VLAN-tagged packets
- VLAN termination types, VLAN termination types
- network management
- Ethernet link aggregation configuration, Configuring Ethernet link aggregation, Ethernet link aggregation configuration task list, Ethernet link aggregation configuration examples
- LLDP basic concepts, Basic concepts
- LLDP configuration, Configuring LLDP, LLDP configuration task list, LLDP configuration examples
- MAC address table configuration, Configuring the MAC address table, MAC address table configuration task list, MAC address table configuration example
- MSTP configuration, MSTP configuration example
- spanning tree configuration, Configuring spanning tree protocols, Spanning tree configuration task lists, Spanning tree configuration example
- VLAN configuration, Configuring VLANs
- VLAN termination configuration, Configuring VLAN termination, VLAN termination configuration task list, VLAN termination configuration examples
- No Agreement Check (spanning tree), Configuring No Agreement Check, No Agreement Check configuration example
P
- P/A transition
- rapid transition mechanism, P/A transition
- packet
- Ethernet link aggregation group BFD, Enabling BFD for an aggregation group
- Ethernet link aggregation packet type-based load sharing, Load sharing modes for link aggregation groups
- VLAN termination configuration, Configuring VLAN termination, VLAN termination configuration task list, VLAN termination configuration examples
- VLAN termination configuration (Dot1q), Configuring Dot1q termination
- VLAN termination configuration (QinQ), Configuring QinQ termination
- parameter
- spanning tree timeout factor, Setting the timeout factor
- per-flow load sharing, Load sharing modes for link aggregation groups
- performing
- spanning tree mCheck, Performing mCheck
- spanning tree mCheck globally, Performing mCheck globally
- spanning tree mCheck in interface view, Performing mCheck in interface view
- per-packet load sharing, Load sharing modes for link aggregation groups
- Per-VLAN Spanning Tree Protocol. Use
- polling
- LLDP enable, Enabling LLDP polling
- port
- Ethernet aggregate interface, Configuring an aggregate interface
- Ethernet aggregate interface (description), Configuring the description of an aggregate interface
- Ethernet aggregate interface (Layer 3 edge), Layer 3 edge aggregate interface configuration example
- Ethernet link aggregate group Selected ports min/max, Setting the minimum and maximum numbers of Selected ports for an aggregation group
- Ethernet link aggregate interface (expected bandwidth), Setting the expected bandwidth for an aggregate interface
- Ethernet link aggregate interface (Layer 2 edge), Layer 2 edge aggregate interface configuration example
- Ethernet link aggregate interface default settings, Restoring the default settings for an aggregate interface
- Ethernet link aggregate interface shutdown, Shutting down an aggregate interface
- Ethernet link aggregation (Layer 2 dynamic), Layer 2 dynamic aggregation configuration example
- Ethernet link aggregation (Layer 2 static), Layer 2 static aggregation configuration example
- Ethernet link aggregation (Layer 3 dynamic), Layer 3 dynamic aggregation configuration example
- Ethernet link aggregation (Layer 3 static), Layer 3 static aggregation configuration example
- Ethernet link aggregation (static mode), How static link aggregation works
- Ethernet link aggregation configuration, Configuring Ethernet link aggregation, Ethernet link aggregation configuration task list, Ethernet link aggregation configuration examples
- Ethernet link aggregation configuration types, Configuration types
- Ethernet link aggregation edge aggregate interface, Edge aggregate interface, Configuring an edge aggregate interface
- Ethernet link aggregation group, Configuring an aggregation group
- Ethernet link aggregation group (Layer 2 static), Configuring a Layer 2 static aggregation group, Configuring a Layer 2 dynamic aggregation group
- Ethernet link aggregation group (Layer 2), Configuring a Layer 2 aggregation group
- Ethernet link aggregation group (Layer 3 dynamic), Configuring a Layer 3 dynamic aggregation group
- Ethernet link aggregation group (Layer 3 static), Configuring a Layer 3 static aggregation group
- Ethernet link aggregation group (Layer 3), Configuring a Layer 3 aggregation group
- Ethernet link aggregation group load sharing, Configuring load sharing for link aggregation groups
- Ethernet link aggregation LACP, LACP
- Ethernet link aggregation LACP port priority, LACP priorities
- Ethernet link aggregation load sharing (Layer 2), Layer 2 aggregation load sharing configuration example
- Ethernet link aggregation load sharing (Layer 3), Layer 3 aggregation load sharing configuration example
- Ethernet link aggregation load sharing mode, Load sharing modes for link aggregation groups
- Ethernet link aggregation local-first load sharing, Enabling local-first load sharing for link aggregation
- Ethernet link aggregation member port, Aggregation group, member port, and aggregate interface
- Ethernet link aggregation member port state, Aggregation states of member ports in an aggregation group, Setting the aggregation state of each member port, Setting the aggregation state of each member port
- Ethernet link aggregation modes, Link aggregation modes
- Ethernet link aggregation operational key, Operational key
- Ethernet link aggregation reference port, Choosing a reference port
- Ethernet link aggregation reference port choice, Choosing a reference port
- Ethernet link aggregation traffic redirection, Enabling link-aggregation traffic redirection
- Layer 2 aggregate interface (ignored VLAN), Specifying ignored VLANs for a Layer 2 aggregate interface
- Layer 3 aggregate interface configuration (MTU), Setting the MTU for a Layer 3 aggregate interface
- Layer 3 aggregate interface traffic processing slot, Specifying a traffic processing slot for a Layer 3 aggregate interface
- LLDP ARP entry generation, Enabling the device to generate ARP or ND entries for received management address LLDP TLVs, Enabling the device to generate ARP or ND entries for received management address LLDP TLVs
- LLDP basic configuration, Performing basic LLDP configurations, Basic LLDP configuration example
- LLDP configuration, Configuring LLDP, LLDP configuration task list, LLDP configuration examples
- LLDP disable operating mode, LLDP operating modes
- LLDP enable, Enabling LLDP
- LLDP frame encapsulation format, Setting an encapsulation format for LLDP frames
- LLDP frame reception, Receiving LLDP frames
- LLDP frame transmission, Transmitting LLDP frames
- LLDP operating mode, Setting the LLDP operating mode
- LLDP polling, Enabling LLDP polling
- LLDP reinitialization delay, Setting the LLDP reinitialization delay
- LLDP Rx operating mode, LLDP operating modes
- LLDP Tx operating mode, LLDP operating modes
- LLDP TxRx operating mode, LLDP operating modes
- MAC address learning, MAC address learning
- MAC address table blackhole entry, Adding or modifying a blackhole MAC address entry
- MAC address table configuration, Configuring the MAC address table, MAC address table configuration task list, MAC address table configuration example
- MAC address table entry configuration, Configuring MAC address entries
- MST port roles, Port roles
- MST port states, Port states
- PVST BPDU guard, Enabling PVST BPDU guard
- RSTP network convergence, RSTP
- spanning tree BPDU drop, Enabling BPDU drop
- spanning tree BPDU guard, Enabling BPDU guard
- spanning tree BPDU transmission rate, Configuring the BPDU transmission rate
- spanning tree edge port configuration, Configuring edge ports
- spanning tree forward delay timer, Setting spanning tree timers
- spanning tree loop guard, Enabling loop guard
- spanning tree path cost calculation standard, Specifying a standard for the device to use when it calculates the default path cost
- spanning tree path cost configuration, Configuring path costs of ports, Configuring path costs of ports
- spanning tree port link type configuration, Configuring the port link type
- spanning tree port mode configuration, Configuring the mode a port uses to recognize and send MSTP frames
- spanning tree port priority configuration, Configuring the port priority
- spanning tree port role restriction, Configuring port role restriction
- spanning tree port state transition output, Enabling outputting port state transition information
- spanning tree root guard, Enabling root guard
- spanning tree TC-BPDU guard, Enabling TC-BPDU guard
- spanning tree TC-BPDU transmission restriction, Configuring TC-BPDU transmission restriction
- STP designated port, Designated bridge and designated port
- STP root port, Root port
- VLAN port link type, Port link type
- port state
- rapid transition mechanism, Rapid transition mechanism
- port-based VLAN
- assignment (access port), Assigning an access port to a VLAN
- assignment (hybrid port), Assigning a hybrid port to a VLAN
- assignment (trunk port), Assigning a trunk port to a VLAN
- configuration, Configuring port-based VLANs, Port-based VLAN configuration example
- port frame handling, How ports of different link types handle frames
- port link type, Port link type
- PVID, PVID
- PPPoE
- VLAN termination configuration (Dot1q PPPoE server support), Configuration example for Dot1q termination supporting PPPoE server
- VLAN termination configuration (QinQ PPPoE server support), Configuration example for QinQ termination supporting PPPoE server
- VLAN termination configuration (QinQ unambiguous), Configuring QinQ termination
- priority
- Ethernet link aggregation LACP, LACP
- Ethernet link aggregation LACP port priority, LACP priorities
- Ethernet link aggregation LACP system priority, LACP priorities
- MAC address table learning priority, Assigning MAC learning priority to interfaces
- spanning tree device priority, Configuring the device priority
- spanning tree port priority configuration, Configuring the port priority
- procedure
- adding MAC address table blackhole entry, Adding or modifying a blackhole MAC address entry
- adding MAC address table entry (global), Adding or modifying a static or dynamic MAC address entry globally
- adding MAC address table entry (on interface), Adding or modifying a static or dynamic MAC address entry on an interface
- assigning MAC address table learning priority to interface, Assigning MAC learning priority to interfaces
- assigning port-based VLAN access port (interface view), Assign an access port to a VLAN in interface view
- assigning port-based VLAN access port (VLAN view), Assign one or multiple access ports to a VLAN in VLAN view
- assigning port-based VLAN hybrid port, Assigning a hybrid port to a VLAN
- assigning port-based VLAN trunk port, Assigning a trunk port to a VLAN
- configuring Ethernet aggregate interface, Configuring an aggregate interface
- configuring Ethernet aggregate interface (description), Configuring the description of an aggregate interface
- configuring Ethernet aggregate interface (Layer 3 edge), Layer 3 edge aggregate interface configuration example
- configuring Ethernet link aggregate interface (Layer 2 edge), Layer 2 edge aggregate interface configuration example
- configuring Ethernet link aggregation, Ethernet link aggregation configuration task list
- configuring Ethernet link aggregation (Layer 2 dynamic), Layer 2 dynamic aggregation configuration example
- configuring Ethernet link aggregation (Layer 2 static), Layer 2 static aggregation configuration example
- configuring Ethernet link aggregation (Layer 3 dynamic), Layer 3 dynamic aggregation configuration example
- configuring Ethernet link aggregation (Layer 3 static), Layer 3 static aggregation configuration example
- configuring Ethernet link aggregation edge aggregate interface, Configuring an edge aggregate interface
- configuring Ethernet link aggregation group, Configuring an aggregation group
- configuring Ethernet link aggregation group (Layer 2 dynamic), Configuring a Layer 2 dynamic aggregation group
- configuring Ethernet link aggregation group (Layer 2 static), Configuring a Layer 2 static aggregation group
- configuring Ethernet link aggregation group (Layer 3 dynamic), Configuring a Layer 3 dynamic aggregation group
- configuring Ethernet link aggregation group (Layer 3 static), Configuring a Layer 3 static aggregation group
- configuring Ethernet link aggregation group BFD, Enabling BFD for an aggregation group
- configuring Ethernet link aggregation group load sharing, Configuring load sharing for link aggregation groups
- configuring Ethernet link aggregation load sharing (Layer 2), Layer 2 aggregation load sharing configuration example
- configuring Ethernet link aggregation load sharing (Layer 3), Layer 3 aggregation load sharing configuration example
- configuring LAN switching spanning tree Digest Snooping, Digest Snooping configuration example
- configuring LLDP, LLDP configuration task list
- configuring LLDP advertisable TLVs, Configuring the advertisable TLVs
- configuring LLDP basics, Performing basic LLDP configurations, Basic LLDP configuration example
- configuring LLDP management address, Configuring the management address and its encoding format
- configuring LLDP management address encoding format, Configuring the management address and its encoding format
- configuring LLDP trapping, Configuring LLDP trapping and LLDP-MED trapping
- configuring LLDP-MED trapping, Configuring LLDP trapping and LLDP-MED trapping
- configuring MAC address table, MAC address table configuration task list, MAC address table configuration example
- configuring MAC address table entry, Configuring MAC address entries
- configuring MAC address table frame forwarding rule, Configuring the unknown frame forwarding rule after the MAC learning limit is reached
- configuring MST region, Configuring an MST region
- configuring MST region max hops, Configuring the maximum hops of an MST region
- configuring MSTP, MSTP configuration task list, MSTP configuration example
- configuring port-based VLAN, Configuring port-based VLANs, Port-based VLAN configuration example
- configuring RSTP, RSTP configuration task list
- configuring spanning tree, Spanning tree configuration task lists, Spanning tree configuration example
- configuring spanning tree BPDU transmission rate, Configuring the BPDU transmission rate
- configuring spanning tree device priority, Configuring the device priority
- configuring spanning tree Digest Snooping, Configuring Digest Snooping
- configuring spanning tree edge port, Configuring edge ports
- configuring spanning tree No Agreement Check, Configuring No Agreement Check, No Agreement Check configuration example
- configuring spanning tree port link type, Configuring the port link type
- configuring spanning tree port mode for MSTP frames, Configuring the mode a port uses to recognize and send MSTP frames
- configuring spanning tree port path cost, Configuring path costs of ports, Configuring path costs of ports
- configuring spanning tree port priority, Configuring the port priority
- configuring spanning tree port role restriction, Configuring port role restriction
- configuring spanning tree protection features, Configuring protection features
- configuring spanning tree root bridge, Configuring the root bridge or a secondary root bridge
- configuring spanning tree root bridge (device), Configuring the current device as the root bridge of a specific spanning tree
- configuring spanning tree secondary root bridge, Configuring the root bridge or a secondary root bridge
- configuring spanning tree secondary root bridge (device), Configuring the current device as a secondary root bridge of a specific spanning tree
- configuring spanning tree switched network diameter, Configuring the network diameter of a switched network
- configuring spanning tree TC Snooping, Configuring TC Snooping
- configuring spanning tree TC-BPDU transmission restriction, Configuring TC-BPDU transmission restriction
- configuring spanning tree timeout factor, Setting the timeout factor
- configuring spanning tree timer, Setting spanning tree timers
- configuring STP, STP configuration task list
- configuring VLAN basic settings, Configuring basic VLAN settings
- configuring VLAN interface, Configuring VLAN interfaces
- configuring VLAN termination, VLAN termination configuration task list
- configuring VLAN termination (default), Configuring default termination
- configuring VLAN termination (Dot1q ambiguous), Configuring Dot1q termination, Configuring ambiguous Dot1q termination, Ambiguous Dot1q termination configuration example
- configuring VLAN termination (Dot1q PPPoE server support), Configuration example for Dot1q termination supporting PPPoE server
- configuring VLAN termination (Dot1q unambiguous), Configuring Dot1q termination, Configuring unambiguous Dot1q termination, Unambiguous Dot1q termination configuration example
- configuring VLAN termination (QinQ ambiguous), Configuring QinQ termination, Configuring ambiguous QinQ termination, Ambiguous QinQ termination configuration example
- configuring VLAN termination (QinQ DHCP relay support), Configuration example for QinQ termination supporting DHCP relay
- configuring VLAN termination (QinQ PPPoE server support), Configuration example for QinQ termination supporting PPPoE server
- configuring VLAN termination (QinQ unambiguous), Configuring QinQ termination, Unambiguous QinQ termination configuration example
- configuring VLAN termination (untagged), Configuring untagged termination
- configuring VLAN termination configuration (QinQ ambiguous), Configuring unambiguous QinQ termination
- configuring VLAN termination packet TPID, Configuring the TPID for VLAN-tagged packets
- disabling LLDP PVID inconsistency check, Disabling LLDP PVID inconsistency check
- displaying Ethernet link aggregation, Displaying and maintaining Ethernet link aggregation
- displaying LLDP, Displaying and maintaining LLDP
- displaying MAC address table, Displaying and maintaining the MAC address table
- displaying spanning tree, Displaying and maintaining the spanning tree
- displaying VLAN, Displaying and maintaining VLANs
- enabling Ethernet link aggregation local-first load sharing, Enabling local-first load sharing for link aggregation
- enabling Ethernet link aggregation traffic redirection, Enabling link-aggregation traffic redirection
- enabling LLDP, Enabling LLDP
- enabling LLDP ARP entry generation, Enabling the device to generate ARP or ND entries for received management address LLDP TLVs
- enabling LLDP ND entry generation, Enabling the device to generate ARP or ND entries for received management address LLDP TLVs
- enabling LLDP polling, Enabling LLDP polling
- enabling PVST BPDU guard, Enabling PVST BPDU guard
- enabling SNMP notifications for new-root election and topology change events, Enabling SNMP notifications for new-root election and topology change events
- enabling spanning tree BPDU drop, Enabling BPDU drop
- enabling spanning tree BPDU guard, Enabling BPDU guard
- enabling spanning tree feature, Enabling the spanning tree feature
- enabling spanning tree loop guard, Enabling loop guard
- enabling spanning tree port state transition information output, Enabling outputting port state transition information
- enabling spanning tree root guard, Enabling root guard
- enabling spanning tree TC-BPDU guard, Enabling TC-BPDU guard
- enabling VLAN termination interface broadcast transmission, Enabling a VLAN termination-enabled interface to transmit broadcasts and multicasts
- enabling VLAN termination interface multicast transmission, Enabling a VLAN termination-enabled interface to transmit broadcasts and multicasts
- maintaining Ethernet link aggregation, Displaying and maintaining Ethernet link aggregation
- maintaining spanning tree, Displaying and maintaining the spanning tree
- maintaining VLAN, Displaying and maintaining VLANs
- modifying MAC address table blackhole entry, Adding or modifying a blackhole MAC address entry
- modifying MAC address table entry (global), Adding or modifying a static or dynamic MAC address entry globally
- modifying MAC address table entry (on interface), Adding or modifying a static or dynamic MAC address entry on an interface
- performing spanning tree mCheck, Performing mCheck
- performing spanning tree mCheck globally, Performing mCheck globally
- performing spanning tree mCheck in interface view, Performing mCheck in interface view
- restoring Ethernet link aggregate interface default settings, Restoring the default settings for an aggregate interface
- setting Ethernet link aggregate group Selected ports min/max, Setting the minimum and maximum numbers of Selected ports for an aggregation group
- setting Ethernet link aggregate interface (expected bandwidth), Setting the expected bandwidth for an aggregate interface
- setting Ethernet link aggregation load sharing mode (global), Setting the global link-aggregation load sharing mode
- setting Ethernet link aggregation load sharing mode (group-specific), Setting the group-specific load sharing mode
- setting Layer 3 aggregate interface (MTU), Setting the MTU for a Layer 3 aggregate interface
- setting LLDP bridge mode, Setting the LLDP bridge mode
- setting LLDP frame encapsulation format, Setting an encapsulation format for LLDP frames
- setting LLDP operating mode, Setting the LLDP operating mode
- setting LLDP parameters, Setting other LLDP parameters
- setting LLDP reinitialization delay, Setting the LLDP reinitialization delay
- setting LLDP source MAC address, Setting the source MAC address of LLDP frames to the MAC address of the subinterface associated with the specified VLAN
- setting MAC address table dynamic aging timer, Setting the aging timer for dynamic MAC address entries
- setting MAC address table learning limit, Setting the MAC learning limit on an interface
- setting spanning tree mode, Setting the spanning tree mode
- shutting down Ethernet link aggregate interface, Shutting down an aggregate interface
- specifying Layer 2 aggregate interface (ignored VLAN), Specifying ignored VLANs for a Layer 2 aggregate interface
- specifying Layer 3 aggregate interface traffic processing slot, Specifying a traffic processing slot for a Layer 3 aggregate interface
- specifying spanning tree port path cost calculation standard, Specifying a standard for the device to use when it calculates the default path cost
- protecting
- SNMP notifications for new-root election and topology change events, Enabling SNMP notifications for new-root election and topology change events
- spanning tree protection features, Configuring protection features
- protocols and standards
- Ethernet link aggregation protocol configuration, Configuration types
- LLDP, Protocols and standards
- MSTP, Protocols and standards
- MSTP protocol frames, MSTP protocol frames
- RSTP protocol frames, RSTP protocol frames
- STP protocol frames, STP protocol frames
- VLAN, Protocols and standards
- PVID
- LLDP PVID inconsistency check disable, Disabling LLDP PVID inconsistency check
- PVID (port-based VLAN), PVID
- PVST, Configuring spanning tree protocols, See also
- mode set, Setting the spanning tree mode
- rapid transition mechanism, Rapid transition mechanism
R
- Rapid Spanning Tree Protocol. Use
- rapid transition mechanism
- edge port rapid transition, Edge port rapid transition
- MSTP, Rapid transition mechanism
- P/A transition, P/A transition
- port state, Rapid transition mechanism
- PVST, Rapid transition mechanism
- root port rapid transition, Root port rapid transition
- RSTP, Rapid transition mechanism
- rate
- spanning tree BPDU transmission rate, Configuring the BPDU transmission rate
- receiving
- LLDP frames, Receiving LLDP frames
- redirecting
- Ethernet link aggregation traffic redirection, Enabling link-aggregation traffic redirection
- reference port (Ethernet link aggregation), Choosing a reference port, Choosing a reference port
- region
- MST, MST region
- MST region configuration, Configuring an MST region
- MST region max hops, Configuring the maximum hops of an MST region
- MST regional root, Regional root
- reinitialization delay (LLDP), Setting the LLDP reinitialization delay
- restoring
- Ethernet link aggregate interface default settings, Restoring the default settings for an aggregate interface
- restrictions
- Ethernet link aggregation group, Configuration restrictions and guidelines
- Ethernet link aggregation traffic redirection, Configuration restrictions and guidelines
- LAN switching STP Digest Snooping configuration, Configuration restrictions and guidelines
- LAN switching STP edge port configuration, Configuration restrictions and guidelines
- LAN switching STP mCheck configuration, Configuration restrictions and guidelines
- LAN switching STP port link type configuration, Configuration restrictions and guidelines
- LAN switching STP TC Snooping configuration, Configuration restrictions and guidelines
- spanning tree port role restriction, Configuring port role restriction
- spanning tree TC-BPDU transmission restriction, Configuring TC-BPDU transmission restriction
- STP Digest Snooping configuration, Configuration restrictions and guidelines
- STP edge port configuration, Configuration restrictions and guidelines
- STP mCheck configuration, Configuration restrictions and guidelines
- STP port link type configuration, Configuration restrictions and guidelines
- STP TC Snooping configuration, Configuration restrictions and guidelines
- STP timer configuration, Configuration restrictions and guidelines
- VLAN termination configuration, Configuration restrictions and guidelines
- root
- MST common root bridge, Common root bridge
- MST regional root, Regional root
- MST root port role, Port roles
- spanning tree root bridge, Configuring the root bridge or a secondary root bridge
- spanning tree root bridge (device), Configuring the current device as the root bridge of a specific spanning tree
- spanning tree root guard, Enabling root guard
- spanning tree secondary root bridge (device), Configuring the current device as a secondary root bridge of a specific spanning tree
- STP algorithm calculation, Calculation process of the STP algorithm
- STP root bridge, Root bridge
- STP root port, Root port
- root port rapid transition
- rapid transition mechanism, Root port rapid transition
- RSTP, Configuring spanning tree protocols, See also
- basic concepts, Basic concepts in RSTP
- BPDU processing, RSTP BPDU processing
- configuration, RSTP configuration task list
- feature enable, Enabling the spanning tree feature in STP/RSTP/MSTP mode
- how it works, How RSTP works
- mode set, Setting the spanning tree mode
- MSTP device implementation, MSTP implementation on devices
- network convergence, RSTP
- port role, Port roles
- port state, Port states
- protocol frames, RSTP protocol frames
- rapid transition mechanism, Rapid transition mechanism
- rule
- MAC address table frame forwarding, Configuring the unknown frame forwarding rule after the MAC learning limit is reached
S
- selecting
- Ethernet link aggregation Selected ports min/max, Setting the minimum and maximum numbers of Selected ports for an aggregation group
- Ethernet link aggregation selected state, Aggregation states of member ports in an aggregation group
- Ethernet link aggregation unselected state, Aggregation states of member ports in an aggregation group
- service
- LLDP service bridge mode, Setting the LLDP bridge mode
- setting
- Ethernet link aggregate group Selected ports min/max, Setting the minimum and maximum numbers of Selected ports for an aggregation group
- Ethernet link aggregate interface (expected bandwidth), Setting the expected bandwidth for an aggregate interface
- Ethernet link aggregation load sharing mode (global), Setting the global link-aggregation load sharing mode
- Ethernet link aggregation load sharing mode (group-specific), Setting the group-specific load sharing mode
- Ethernet link aggregation member port state, Setting the aggregation state of each member port, Setting the aggregation state of each member port
- Layer 3 aggregate interface (MTU), Setting the MTU for a Layer 3 aggregate interface
- LLDP bridge mode, Setting the LLDP bridge mode
- LLDP frame encapsulation format, Setting an encapsulation format for LLDP frames
- LLDP operating mode, Setting the LLDP operating mode
- LLDP parameters, Setting other LLDP parameters
- LLDP reinitialization delay, Setting the LLDP reinitialization delay
- LLDP source MAC address, Setting the source MAC address of LLDP frames to the MAC address of the subinterface associated with the specified VLAN
- MAC address table dynamic aging timer, Setting the aging timer for dynamic MAC address entries
- MAC address table learning limit, Setting the MAC learning limit on an interface
- spanning tree mode, Setting the spanning tree mode
- shutting down
- Ethernet link aggregate interface, Shutting down an aggregate interface
- SNAP
- LLDP frame encapsulation, LLDP frame formats
- LLDP frame encapsulation format, Setting an encapsulation format for LLDP frames
- snooping
- spanning tree Digest Snooping, Configuring Digest Snooping, Digest Snooping configuration example
- spanning tree TC Snooping, Configuring TC Snooping
- spanning tree, Configuring spanning tree protocols, See also STP, RSTP, PVST, MSTP
- BPDU drop, Enabling BPDU drop
- BPDU guard enable, Enabling BPDU guard
- BPDU transmission rate configuration, Configuring the BPDU transmission rate
- configuration, Configuring spanning tree protocols, Spanning tree configuration task lists, Spanning tree configuration example
- device priority configuration, Configuring the device priority
- Digest Snooping, Configuring Digest Snooping, Digest Snooping configuration example
- displaying, Displaying and maintaining the spanning tree
- edge port configuration, Configuring edge ports
- feature enable, Enabling the spanning tree feature
- loop guard enable, Enabling loop guard
- maintaining, Displaying and maintaining the spanning tree
- mCheck, Performing mCheck
- mode set, Setting the spanning tree mode
- MST region max hops, Configuring the maximum hops of an MST region
- MSTP, MSTP, See also
- No Agreement Check, Configuring No Agreement Check, No Agreement Check configuration example
- port link type configuration, Configuring the port link type
- port mode configuration, Configuring the mode a port uses to recognize and send MSTP frames
- port path cost calculation standard, Specifying a standard for the device to use when it calculates the default path cost
- port path cost configuration, Configuring path costs of ports, Configuring path costs of ports
- port priority configuration, Configuring the port priority
- port role restriction, Configuring port role restriction
- port state transition output, Enabling outputting port state transition information
- protection features, Configuring protection features
- PVST BPDU guard, Enabling PVST BPDU guard
- root bridge configuration, Configuring the root bridge or a secondary root bridge
- root bridge configuration (device), Configuring the current device as the root bridge of a specific spanning tree
- root guard enable, Enabling root guard
- RSTP, RSTP, See also
- secondary root bridge configuration (device), Configuring the current device as a secondary root bridge of a specific spanning tree
- SNMP notifications for new-root election and topology change events, Enabling SNMP notifications for new-root election and topology change events
- switched network diameter, Configuring the network diameter of a switched network
- TC Snooping, Configuring TC Snooping
- TC-BPDU guard, Enabling TC-BPDU guard
- TC-BPDU transmission restriction, Configuring TC-BPDU transmission restriction
- timeout factor configuration, Setting the timeout factor
- timer configuration, Setting spanning tree timers
- specifying
- Layer 2 aggregate interface (ignored VLAN), Specifying ignored VLANs for a Layer 2 aggregate interface
- Layer 3 aggregate interface traffic processing slot, Specifying a traffic processing slot for a Layer 3 aggregate interface
- spanning tree port path cost calculation standard, Specifying a standard for the device to use when it calculates the default path cost
- state
- Ethernet link aggregation member port state, Aggregation states of member ports in an aggregation group, Setting the aggregation state of each member port, Setting the aggregation state of each member port
- static
- Ethernet link aggregation (Layer 2), Layer 2 static aggregation configuration example
- Ethernet link aggregation (Layer 3), Layer 3 static aggregation configuration example
- Ethernet link aggregation (static mode), How static link aggregation works
- Ethernet link aggregation group, Configuring a Layer 2 aggregation group, Configuring a Layer 3 aggregation group
- Ethernet link aggregation mode, Link aggregation modes
- Layer 2 Ethernet link aggregation group, Configuring a Layer 2 static aggregation group
- Layer 3 Ethernet link aggregation group, Configuring a Layer 3 static aggregation group
- MAC address table entry, Types of MAC address entries
- MAC address table entry configuration (global), Adding or modifying a static or dynamic MAC address entry globally
- MAC address table entry configuration (on interface), Adding or modifying a static or dynamic MAC address entry on an interface
- STP
- algorithm calculation, Calculation process of the STP algorithm
- basic concepts, Basic concepts in STP
- BPDU forwarding, The configuration BPDU forwarding mechanism of STP
- configuration, STP configuration task list
- configuration BPDUs, Configuration BPDUs
- designated bridge, Designated bridge and designated port
- designated port, Designated bridge and designated port
- Digest Snooping configuration restrictions, Configuration restrictions and guidelines, Configuration restrictions and guidelines
- edge port configuration restrictions, Configuration restrictions and guidelines, Configuration restrictions and guidelines
- feature enable, Enabling the spanning tree feature in STP/RSTP/MSTP mode
- loop detection, STP
- mCheck configuration restrictions, Configuration restrictions and guidelines, Configuration restrictions and guidelines
- mode set, Setting the spanning tree mode
- MSTP device implementation, MSTP implementation on devices
- path cost, Path cost
- port link type configuration restrictions, Configuration restrictions and guidelines, Configuration restrictions and guidelines
- port state, Port states
- protocol frames, STP protocol frames
- root bridge, Root bridge
- root port, Root port
- TC Snooping configuration restrictions, Configuration restrictions and guidelines, Configuration restrictions and guidelines
- TCN BPDUs, TCN BPDUs
- timer configuration restrictions, Configuration restrictions and guidelines
- timers, STP timers
- subinterface
- LLDP ARP entry generation, Enabling the device to generate ARP or ND entries for received management address LLDP TLVs
- LLDP ND entry generation, Enabling the device to generate ARP or ND entries for received management address LLDP TLVs
- LLDP source MAC address, Setting the source MAC address of LLDP frames to the MAC address of the subinterface associated with the specified VLAN
- SVLAN
- VLAN termination application scenario, VLAN termination application scenarios
- VLAN termination configuration, Configuring VLAN termination, VLAN termination configuration task list, VLAN termination configuration examples
- switching
- spanning tree switched network diameter, Configuring the network diameter of a switched network
T
- table
- MAC address, Configuring the MAC address table, MAC address table configuration task list, MAC address table configuration example
- MAC address table learning limit, Setting the MAC learning limit on an interface
- MSTP VLAN-to-instance mapping table, VLAN-to-instance mapping table
- tag
- VLAN termination configuration, Configuring VLAN termination, VLAN termination configuration task list, VLAN termination configuration examples
- VLAN termination configuration (Dot1q), Configuring Dot1q termination
- VLAN termination configuration (QinQ), Configuring QinQ termination
- VLAN termination packet TPID, Configuring the TPID for VLAN-tagged packets
- VLAN termination types, VLAN termination types
- TC Snooping (spanning tree), Configuring TC Snooping
- TC-BPDU
- spanning tree TC-BPDU guard, Enabling TC-BPDU guard
- spanning tree TC-BPDU transmission restriction, Configuring TC-BPDU transmission restriction
- time
- Ethernet link aggregation LACP timeout interval, LACP
- timeout
- Ethernet link aggregation LACP long timeout interval, LACP timeout interval
- Ethernet link aggregation LACP short timeout interval, LACP timeout interval
- spanning tree timeout factor, Setting the timeout factor
- timer
- LLDP reinitialization delay, Setting the LLDP reinitialization delay
- MAC address table dynamic aging, Setting the aging timer for dynamic MAC address entries
- spanning tree forward delay, Setting spanning tree timers
- spanning tree hello, Setting spanning tree timers
- spanning tree max age, Setting spanning tree timers
- STP forward delay, STP timers
- STP hello, STP timers
- STP max age, STP timers
- TLV
- LLDP advertisable TLV configuration, Configuring the advertisable TLVs
- LLDP management address configuration, Configuring the management address and its encoding format
- LLDP management address encoding format, Configuring the management address and its encoding format
- LLDP parameters, Setting other LLDP parameters
- LLDPDU basic management types, TLVs
- LLDPDU LLDP-MED types, TLVs
- LLDPDU management address TLV, Management address
- LLDPDU organization-specific types, TLVs
- topology
- STP TCN BPDU protocol frames, STP protocol frames
- TPID for VLAN-tagged packets, Configuring the TPID for VLAN-tagged packets
- traffic
- Ethernet link aggregation traffic redirection, Enabling link-aggregation traffic redirection
- transmitting
- LLDP frames, Transmitting LLDP frames
- spanning tree TC-BPDU transmission restriction, Configuring TC-BPDU transmission restriction
- VLAN termination broadcast, Enabling a VLAN termination-enabled interface to transmit broadcasts and multicasts
- VLAN termination multicast, Enabling a VLAN termination-enabled interface to transmit broadcasts and multicasts
- trapping
- LLDP configuration, Configuring LLDP trapping and LLDP-MED trapping
- LLDP-MED configuration, Configuring LLDP trapping and LLDP-MED trapping
- trunk port
- port-based VLAN assignment (trunk port), Assigning a trunk port to a VLAN
- type
- VLAN termination default, VLAN termination types
- VLAN termination Dot1q, VLAN termination types
- VLAN termination QinQ, VLAN termination types
- VLAN termination untagged, VLAN termination types
V
- virtual
- Virtual Local Area Network. Use
- VLAN
- basic configuration, Configuring basic VLAN settings
- configuration, Configuring VLANs
- display, Displaying and maintaining VLANs
- frame encapsulation, VLAN frame encapsulation
- interface configuration, Configuring VLAN interfaces
- Layer 2 Ethernet aggregate interface (ignored VLAN), Specifying ignored VLANs for a Layer 2 aggregate interface
- LLDP source MAC address, Setting the source MAC address of LLDP frames to the MAC address of the subinterface associated with the specified VLAN
- maintain, Displaying and maintaining VLANs
- MSTP VLAN-to-instance mapping table, VLAN-to-instance mapping table
- port link type, Port link type
- port-based configuration, Configuring port-based VLANs, Port-based VLAN configuration example
- port-based VLAN assignment (access port), Assigning an access port to a VLAN
- port-based VLAN assignment (hybrid port), Assigning a hybrid port to a VLAN
- port-based VLAN assignment (trunk port), Assigning a trunk port to a VLAN
- port-based VLAN frame handling, How ports of different link types handle frames
- protocols and standards, Protocols and standards
- PVID, PVID
- VLAN termination
- application scenario, VLAN termination application scenarios
- configuration, Configuring VLAN termination, VLAN termination configuration task list, VLAN termination configuration examples
- configuration (Dot1q ambiguous), Configuring Dot1q termination, Configuring ambiguous Dot1q termination, Ambiguous Dot1q termination configuration example
- configuration (Dot1q PPPoE server support), Configuration example for Dot1q termination supporting PPPoE server
- configuration (Dot1q unambiguous), Configuring Dot1q termination, Configuring unambiguous Dot1q termination, Unambiguous Dot1q termination configuration example
- configuration (QinQ ambiguous), Configuring QinQ termination, Configuring ambiguous QinQ termination, Ambiguous QinQ termination configuration example
- configuration (QinQ DHCP relay support), Configuration example for QinQ termination supporting DHCP relay
- configuration (QinQ PPPoE server support), Configuration example for QinQ termination supporting PPPoE server
- configuration (QinQ unambiguous), Configuring QinQ termination, Configuring unambiguous QinQ termination , Unambiguous QinQ termination configuration example
- configuration (untagged), Configuring untagged termination
- configuration restrictions, Configuration restrictions and guidelines
- default, Configuring default termination
- interface broadcast transmission, Enabling a VLAN termination-enabled interface to transmit broadcasts and multicasts
- interface multicast transmission, Enabling a VLAN termination-enabled interface to transmit broadcasts and multicasts
- packet TPID, Configuring the TPID for VLAN-tagged packets
- types, VLAN termination types