Enabling local-first load sharing for link aggregation
Use local-first load sharing in a multidevice link aggregation scenario to distribute traffic preferentially across member ports on the ingress card or device.
When you aggregate ports on different member devices in an IRF fabric, you can use local-first load sharing to reduce traffic on IRF links, as shown in Figure 5. For more information about IRF, see IRF Configuration Guide.
Figure 5: Load sharing for multidevice link aggregation in an IRF fabric
To enable local-first load sharing for link aggregation:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enable local-first load sharing for link aggregation. | link-aggregation load-sharing mode local-first | By default, local-first load sharing for link aggregation is enabled. |