Configuration procedure
Use this feature on when your HPE device is connected to a third-party device that uses its private key to calculate the configuration digest.
To configure Digest Snooping:
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter Layer 2 Ethernet interface or Layer 2 aggregate interface view. | interface interface-type interface-number | N/A |
3. Enable Digest Snooping on the interface. | stp config-digest-snooping | By default, Digest Snooping is disabled on ports. |
4. Return to system view. | quit | N/A |
5. Enable Digest Snooping globally. | stp global config-digest-snooping | By default, Digest Snooping is disabled globally. |