Setting the LLDP bridge mode
The following LLDP bridge modes are available:
Customer bridge mode—LLDP supports nearest bridge agents, nearest non-TPMR bridge agents, and nearest customer bridge agents. LLDP processes the LLDP frames with destination MAC addresses for these agents and transparently transmits the LLDP frames with other destination MAC addresses in the VLAN.
Service bridge mode—LLDP supports nearest bridge agents and nearest non-TPMR bridge agents. LLDP processes the LLDP frames with destination MAC addresses for these agents and transparently transmits the LLDP frames with other destination MAC addresses in the VLAN.
To set the LLDP bridge mode:
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Set the LLDP bridge mode to service bridge. | lldp mode service-bridge | By default, LLDP operates in customer bridge mode. |