Configuration example for Dot1q termination supporting PPPoE server
Network requirements
As shown in Figure 21, the router acts as a PPPoE server. Hosts in different VLANs access the Internet through the PPPoE server.
Configure Dot1q termination so that hosts in different VLANs can access the Internet.
Figure 21: Network diagram
Configuration procedure
# Configure VLANs and Dot1q termination. For the configuration procedure, see "Ambiguous Dot1q termination configuration example." (Details not shown.)
# Configure the router as the PPPoE server. Configure PPPoE settings on GigabitEthernet 2/1/1.10 on the router. For more information about the PPPoE configuration, see Layer 2—WAN Configuration Guide. (Details not shown.)