Where two or more stacks exist in the same subnet, it is easy to move a Member of one stack to another stack if the destination stack is not full. This procedure is nearly identical to manually adding a Candidate to a stack. If the stack from which you want to move the Member has a Manager password, you will need to know it to make the move.
-
To move a Member from one stack to another, go to the Main Menu of the Commander in the destination stack and display the Stacking Menu by selecting 9. Stacking...(Using the Stacking Status (All) screen to find member MAC addresses
-
To learn or verify the MAC address of the Member you want to move, selecting 2. Stacking Status (All) to display a list of all Commanders, Members, and Candidates in the subnet.
For a description of Status column entries, see Status messages.
-
In the Stacking Status (All) screen, find the Member switch you want to move, note its MAC address, then press B (
Back
) to return to the Stacking Menu. -
Select the Commander's Stack Management screen by selecting 4. Stack Management.
A Candidate list on the Stack Management screen
Pacific Ocean ======================- CONSOLE - MANAGER MODE -=========================== Stacking - Stack Management Switch Number : 3 MAC Address: Candidate password: Candidate MAC System Name Device Type ------------- ---------------- ----------- 0060b0-e94300 DEFAULT_CONFIG HP Switch 080009-918f80 DEFAULT_CONFIG HP Switch Actions-> Cancel Edit Save Help Use arrow keys to change field selection, <Space> to toggle field choices, and <Enter> to go to Actions.
-
Press A (for Add) to add the Member. You will then see the screen listing any available candidates. You will not see the switch you want to add because it is a Member of another stack and not a Candidate.
-
Either accept the displayed switch number or enter another available number. (The range is 0 - 15, with 0 reserved for the Commander.)
-
Use the down-arrow key to move the cursor to the MAC Address field, then enter the MAC address of the desired Member you want to move from another stack.
-
-
If the stack containing the Member you are moving has a Manager password, press the down-arrow key to select the Candidate Password field, then enter the password.
-
If the stack containing the Member you want to move does not have a password, go to Step 9.
-
-
Press Enter to return to the Actions line, then press S (for Save) to complete the Add process for the selected Member. You will then see a screen similar to the one in Step 4, showing the newly added Member.
If you are using VLANs in your stack environment, see Stacking operation with multiple VLANs configured.