Switch Stack Management

HP Switch Stack Management is available on 2530, 2615, 2620, and 2915 switches.

Introduction

Stacking enables you to use a single IP address and standard network cabling to manage a group of up to 16 total switches in the same IP subnet (broadcast domain). Using stacking, you can:

Reduce the number of IP addresses needed in your network.
Simplify management of small workgroups or wiring closets while scaling your network to handle increased bandwidth demand.
Eliminate any specialized cables for stacking connectivity and remove the distance barriers that typically limit your topology options when using other stacking technologies.
Add switches to your network without having to first perform IP addressing tasks.


	NOTE: Stacking and meshing cannot both be enabled at the same time. In the default configuration, stacking in the "candidate" state is enabled. For additional rules and restrictions, see Operating rules for stacking.

prev		next
About RPVST+	home	Configuring stack management