Verifying the configuration
# Verify that the portal configuration has taken effect.
[AP] display portal ap ap2 Portal information of ap2 Radio ID: 2 SSID: portal_1 Authorization : Strict checking ACL : Disable User profile : Disable IPv4: Portal status: Enabled Authentication type: Direct Portal Web server: newpt(active) Secondary portal Web server: Not configured Authentication domain: Not configured User-dhcp-only: Disabled Max portal users: Not configured Bas-ip: 2.2.2.1 Action for server detection: Server type Server name Action -- -- -- Destination authentication subnet: IP address Mask IPv6: Portal status: Disabled Authentication type: Disabled Portal Web server: Not configured Secondary portal Web server: Not configured Authentication domain: Not configured User-dhcp-only: Disabled Max portal users: Not configured Bas-ipv6: Not configured Action for server detection: Server type Server name Action -- -- -- Destination authentication subnet: IP address Prefix length
A user can perform portal authentication by using the HPE iNode client or a Web browser. Before passing the authentication, the user can access only the authentication page http://192.168.0.111:8080/portal. All Web requests from the user will be redirected to the authentication page. After passing the authentication, the user can access other network resources.
# After the user passes authentication, use the following command to display information about the portal user.
[AP] display portal user ap ap2 Total portal users: 1 Username: 1 AP name: ap2 Radio ID: 2 SSID: portal_1 Portal server: newpt State: Online VPN instance: N/A MAC IP VLAN Interface 0015-005e-9398 2.2.2.2 2 WLAN-BSS1/0/1 Authorization information: DHCP IP pool: N/A User profile: N/A ACL number: N/A Inbound CAR: N/A Outbound CAR: N/A