Enabling MOE
Use the CLI command to enable MOE for IPv4 multicast
traffic. The running-config
file displays the
MOE enabled for IPv4 traffic.
Syntax
fabric-offload multicast ipv4
route {enable|disable}
Description
Enable or disable multicast offload engine for routed multicast IPv4 traffic.
Usage
fabric-offload multicast ipv4 route
{enable|disable}
Example output
(Prev-mode)switch# show running-config Running configuration: ; J9851A Configuration Editor; Created on release #KB.16.01.0000x ; Ver #0a:19.f4.7b.ff.ff.fc.ff.ff.3f.ef:b0 hostname "HP-5412Rzl2" module A type j9992a module L type j9987a fabric-offload multicast ipv4 route enable ip routing ip multicast-routing snmp-server community "public" unrestricted oobm ip address dhcp-bootp exit vlan 1 name "DEFAULT_VLAN" untagged A1-A21,L1-L24 ip address dhcp-bootp exit no allow-v2-modules preview-mode