provision

Use provision to enable preprovisioning for a slot.

Use undo provision to disable preprovisioning for a slot.

Syntax

provision model model

undo provision model

Default

Preprovisioning is disabled.

Views

Slot view

Predefined user roles

network-admin

mdc-admin

Parameters

model model: Specifies the card model to be preprovisioned. To obtain available models, enter provision model ?.

Usage guidelines

This command allows you to preconfigure interfaces on an offline module.

The device automatically creates interfaces when you enable preprovisioning for a module. The display interface command does not display these interfaces until the module comes online.

When you disable preprovisioning for a slot, the device removes all preconfigured settings from the slot.

Examples

# (In standalone mode.) Enable preprovisioning for the LSVM1TGS24FX1 module in slot 2.

<Sysname> system-view
[Sysname] slot 2
[Sysname-slot-2] provision model LSVM1TGS24FX1

# (In IRF mode.) Enable preprovisioning for the LSVM1TGS24FX1 module in slot 2 of chassis 1.

<Sysname> system-view
[Sysname] chassis 1 slot 2
[Sysname-chassis-1-slot-2] provision model LSVM1TGS24FX1

Related commands

chassis slot

display provision failed-config

slot