display provision failed-config

Use display provision failed-config to display the preprovisioned commands that were not applied to preprovisioned interface cards that came online.

Syntax

display provision failed-config

Views

Any view

Predefined user roles

network-admin

network-operator

mdc-admin

mdc-operator

Usage guidelines

Commands preprovisioned for a module are applied when the module comes online. A preprovisioned command cannot be applied if it conflicts with the running configuration.

Use this command to verify the application result of preprovisioned commands except for the following commands:

• duplex

• location

• speed

• sflow

To verify the application result of the listed commands, use the display current-configuration command. The display provision failed-config command might display incorrect application results for the listed commands.

Examples

# Display preprovisioned commands that were not applied.

<Sysname> display provision failed-config
Configuration applied at: Sat Jun 14 06:06:00 2014

Slot information: chassis 1 slot 1
Commands that failed to be applied:
#
interface FortyGigE1/1/0/1
 speed 40000
#

Related commands

provision