line class
Use line class to enter user line class view.
Syntax
line class { aux | vty }
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
aux: Specifies the AUX line class view.
vty: Specifies the VTY line class view.
Usage guidelines
To configure the same settings for all user lines of a line class, use this command to enter the user line class view.
Some login management commands are available in both user line view and user line class view:
A setting in user line view is applied only to the user line. A setting in user line class view is applied to all user lines of the class.
A non-default setting in either view takes precedence over a default setting in the other view. A non-default setting in user line view takes precedence over a non-default setting in user line class view.
A setting in user line view takes effect immediately and affects the online user. A setting in user line class view does not affect online users and takes effect only for users who log in after the configuration is completed.
Examples
# Set the CLI connection idle-timeout timer to 15 minutes in VTY line class view.
<Sysname> system-view [Sysname] line class vty [Sysname-line-class-vty] idle-timeout 15
# In AUX line class view, configure character s as the shortcut key for starting a terminal session.
<Sysname> system-view [Sysname] line class aux [Sysname-line-class-aux] activation-key s [Sysname-line-class-aux] quit
# In AUX 0 line view, restore the default shortcut key for starting a terminal session.
[Sysname] line aux 0 [Sysname-line-aux0] undo activation-key
Alternatively:
[Sysname-line-aux0] activation-key 13
To verify the configuration:
Exit the console session.
[Sysname-line-aux0] return <Sysname> quit
Log in again through the AUX line.
The following message appears:
Press ENTER to get started.
Press Enter.
Pressing Enter does not start a session.
Enter s.
A terminal session is started.
<Sysname>
Related commands
line