display fcs discovery status
Use display fcs discovery status to display the topology discovery status.
Syntax
display fcs discovery status [ vsan vsan-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
vsan vsan-id: Specifies a VSAN by its ID in the range of 1 to 3839. If you do not specify a VSAN, this command display the topology discovery status in all VSANs.
Examples
# Display the topology discovery status in all VSANs.
<Sysname> display fcs discovery status VSAN Discovery Status 1 inProgress 2 completed 3 localOnly
Related commands
fcs discovery start
fcs discovery stop