virtual-system

Use virtual-system to create an EVI IS-IS virtual system.

Use undo virtual-system to delete an EVI IS-IS virtual system.

Syntax

virtual-system systemid

undo virtual-system systemid

Default

No EVI IS-IS virtual system is created.

Views

EVI IS-IS process view

Predefined user roles

network-admin

mdc-admin

Parameters

systemid: Specifies a virtual system ID in the XXXX.XXXX.XXXX format. Each X represents a hexadecimal digit.

Usage guidelines

The virtual system ID must be unique in the EVI network.

An EVI IS-IS process sends all local MAC reachability information in one LSP. By default, an LSP can convey up to 55 x 2¹⁰ MAC address entries.

To increase this number to accommodate all local MAC address entries, create virtual systems. Each virtual system represents an increase of 55 x 2¹⁰ MAC address entries.

Examples

# Create the virtual system 0001.0001.0001.

<Sysname> system-view
[Sysname] evi-isis 101
[Sysname-evi-isis-101] virtual-system 0001.0001.0001