evi site-id

Use evi site-id to configure a site ID for the device.

Use undo evi site-id to restore the default.

Syntax

evi site-id site-id

undo evi site-id

Default

The site ID of the device is 0.

Views

System view

Predefined user roles

network-admin

mdc-admin

Parameters

site-id: Specifies a site ID in the range of 1 to 65535.

Usage guidelines

By default, all edge devices in an EVI network have a site ID of 0. To identify the site of each edge device, you can change their site IDs.

Manually assigned site IDs must be unique in the EVI network. If the edge devices at two sites are assigned the same site ID, EVI IS-IS isolates the device with the lower MAC address. The isolated device can only receive EVI IS-IS hello packets. It cannot exchange EVI IS-IS packets with its neighbors. To identify isolated devices, use the display evi isis brief command or the display evi isis peer command.

	NOTE: EVI IS-IS does not perform isolation for edge devices that use the default site ID.

Examples

# Assign a site ID of 201 to the device.

<Sysname> system-view
[Sysname] evi site-id 201

Related commands

display evi-isis brief

display evi isis peer