display evi neighbor-discovery client summary
Use display evi neighbor-discovery client summary to display ENDC settings and connectivity to ENDSs.
Syntax
display evi neighbor-discovery client summary
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Examples
# Display ENDC running information.
<Sysname> display evi neighbor-discovery client summary Status: I-Init E-Establish P-Probe Interface Local Address Server Address Network ID Reg Auth Status Tunnel0 20.0.0.2 20.0.0.1 1 15 enabled E Tunnel0 20.0.0.2 20.0.0.3 1 15 enabled P Tunnel1 21.0.0.2 21.0.0.1 2 15 disabled P
Table 13: Command output
Field | Description |
---|---|
Interface | Name of the ENDC-enabled EVI tunnel interface. |
Local Address | Source IP address of the EVI tunnel. If no IP address has been assigned to the EVI tunnel, this field displays NA. |
Server Address | IP address of the ENDS. |
Network ID | If no network ID has been configured, this field displays NA. |
Reg | Registration update interval. The ENDC updates its registration with the ENDS at this interval. |
Auth | ENDP authentication status: enabled or disabled. |
Status | Status of the connection between the ENDC and the ENDS:
|
Related commands
evi neighbor-discovery authentication
evi neighbor-discovery client enable
evi neighbor-discovery client register-interval