Enabling R-APS packets to carry the ring ID in the destination MAC address
Perform this task to configure the ring ID as the last byte of the destination MAC address for R-APS packets. The ring of R-APS packets can be identified by their destination MAC addresses.
To enable R-APS packets to carry the ring ID in the destination MAC address:
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter ERPS ring view. | erps ring ring-id | N/A |
3. Enable R-APS packets to carry the ring ID in the destination MAC address. | r-aps ring-mac | By default, R-APS packets do not carry ring IDs in their destination MAC addresses. The last byte of the destination MAC address is 1. |