Configuring an ERPS ring

Step	Command	Remarks
1. Enter system view.	system-view	N/A
2. Create an ERPS ring.	erps ring ring-id	A ring ID uniquely identifies an ERPS ring. All nodes on an ERPS ring must be configured with the same ring ID.
3. (Optional.) Configure the ring type.	ring-type sub-ring	By default, an ERPS ring is a major ring.

Step

Command

Remarks

1. Enter system view.

system-view

N/A

2. Create an ERPS ring.

erps ring ring-id

A ring ID uniquely identifies an ERPS ring.

All nodes on an ERPS ring must be configured with the same ring ID.

3. (Optional.) Configure the ring type.

ring-type sub-ring

By default, an ERPS ring is a major ring.

prev	up	next
Enabling flush packet transparent transmission	home	Enabling R-APS packets to carry the ring ID in the destination MAC address