Performing the <edit-config> operation

The <edit-config> operation supports the following operation attributes: merge, create, replace, remove, delete, default-operation, error-option, test-option, and incremental. For more information about these attributes, see "Appendix A Supported NETCONF operations."

# Copy the following text to perform the <edit-config> operation:

<?xml version="1.0"?>
<rpc message-id="100" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
  <edit-config>
    <target><running></running></target>
<error-option>
   Default operation when an error occurs
</error-option>
    <config>
      <top xmlns="http://www.hp.com/netconf/config:1.0">
        Specify the module name, submodule name, table name, and column name
      </top>
    </config>
  </edit-config>
</rpc>

After receiving the edit-config request, the device returns a response in the following format if the operation is successful:

<?xml version="1.0">
<rpc-reply message-id="100" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
  <ok/>
</rpc-reply>

# Perform the <get> operation to verify that the current value of the parameter is the same as the value specified through the <edit-config> operation. (Details not shown.)