Setting the non-revertive mode
Set the non-revertive mode as required.
To set the non-revertive mode:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter ERPS ring view. | erps ring ring-id | N/A |
3. Enter ERPS instance view. | instance instance-id | N/A |
4. Configure the node as the owner node and port 0 as the RPL port. | node-role owner rpl port0 | Either port 0 or port 1 can be configured as the RPL port. |
5. Set the non-revertive mode. | revertive-operation non-revertive | By default, revertive mode is used. |