Configuring R-APS packet levels
A node does not process R-APS packets whose levels are greater than the level of R-APS packets sent by the node. On a ring, the levels of R-APS packets must be the same for all nodes in an ERPS instance.
To configure the R-APS packet level:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter ERPS ring view. | erps ring ring-id | N/A |
3. Enter ERPS instance view. | instance instance-id | N/A |
4. Configure the R-APS packet level. | r-aps level level-value | By default, the level for R-APS packets is 7. |