timer realtime-accounting (RADIUS scheme view)
Use timer realtime-accounting to set the real-time accounting interval.
Use undo timer realtime-accounting to restore the default.
Syntax
timer realtime-accounting interval [ second ]
undo timer realtime-accounting
Default
The real-time accounting interval is 12 minutes.
Views
RADIUS scheme view
Predefined user roles
network-admin
mdc-admin
Parameters
interval: Specifies the real-time accounting interval in the range of 0 to 71582.
second: Specifies the measurement unit as second. If you do not specify this keyword, the real-time accounting interval is measured in minutes.
Usage guidelines
When the real-time accounting interval on the device is not zero, the device sends online user accounting information to the RADIUS accounting server at the configured interval.
When the real-time accounting interval on the device is zero, the device sends online user accounting information to the RADIUS accounting server at the real-time accounting interval configured on the server. If the real-time accounting interval is not configured on the server, the device does not send online user accounting information.
A short interval helps improve accounting precision but requires many system resources.
Table 7: Recommended real-time accounting intervals
Number of users | Real-time accounting interval |
|---|---|
1 to 99 | 3 minutes |
100 to 499 | 6 minutes |
500 to 999 | 12 minutes |
1000 or more | 15 minutes or longer |
Examples
# In RADIUS scheme radius1, set the real-time accounting interval to 51 minutes.
<Sysname> system-view [Sysname] radius scheme radius1 [Sysname-radius-radius1] timer realtime-accounting 51
Related commands
retry realtime-accounting