Configuring a CE1 interface in CE1 mode
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter CE1 interface view. | controller e1 interface-number | N/A |
3. Configure the interface to operate in channelized mode. | using ce1 | By default, a CE1 interface operates in channelized mode. |
4. Bundle timeslots on the interface into a channel set. | channel-set set-number timeslot-list list | By default, no channel sets exist on a CE1 interface. |
5. Set the framing format. | frame-format { crc4 | no-crc4 } | The default is no-CRC4. |
6. (Optional.) Enable RAI detection on the interface. | alarm-detect rai | By default, RAI detection is enabled on the interface. |
7. (Optional.) Set other interface parameters. | N/A |