No NetFlow data on NTA
To resolve the problem:
Verify that the device uses the same interface index as used in a NetFlow packet.
If the interface indexes are different, configure the interface index:
Click the Service tab.
From the navigation tree, select Traffic Analysis and Audit > Settings.
The Settings page opens.
In the Guide to Quick Traffic Analysis and Audit Management area, click Traffic Analysis Task Management.
The Task Management page opens.
On the Traffic Analysis Task List, click Add.
The Select Task Type page opens.
Select Interface and click Next.
The Add Traffic Analysis Task page opens.
Configure the basic task information, and then click Select in the Interface Information area.
On the Add Interface page, click the Configure Manually tab.
Configure the interface index and click OK.
If the problem persists, contact HPE Support.