destination ipv6
Syntax
destination ipv6 <IPVv6-ADDR>
no destination ipv6 <IPV6-ADDR>
Description
Sets the destination IPv6 address for an IP tunnel. Specify the address of the interface on the remote device to which the tunnel will be established.
The
no
form of this command deletes the destination IPv6 address from an IP tunnel.
Command context
config-ip-if
Parameters
<IPV6-ADDR>
Specifies the tunnel IP address in IPv6 format (
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx
), wherex
is a hexadecimal number from 0 to F. You can use two colons (::) to represent consecutive zeros (but only once), remove leading zeros, and collapse a sextet of four zeros to a single 0. For example, this address2222:0000:3333:0000:0000:0000:4444:0055
becomes2222:0:3333::4444:55
.
Authority
Administrators
Examples
Defines the destination IPv6 address to be 2001:DB8::1 for IPv6 in IPv6 tunnel .
switch(config)# interface tunnel 8 mode ip 6in6 switch(config-ip-if)# destination ipv6 2001:DB8::1
Deletes the destination IPv6 address 2001:DB8::1 from IPv6 in IPv6 tunnel 8.
switch(config)# interface tunnel 8 switch(config-ip-if)# no destination ipv6 2001:DB8::1