destination ip
Syntax
destination ip <IPV4-ADDR>
no destination ip <IPV4-ADDR>
Description
Sets the destination IP address for an IP tunnel. Specify the address of the interface on the remote device to which the tunnel will be established.
The
no
form of this command deletes the destination IP address from an IP tunnel.
Command context
config-gre-if
config-ip-if
Parameters
<IPV4-ADDR>
Specifies the destination IP address in IPv4 format (
x.x.x.x
), wherex
is a decimal number from 0 to 255. You can remove leading zeros. For example, the address192.169.005.100
becomes192.168.5.100
.
Authority
Administrators
Examples
Defines the destination IP address to be 10.10.10.1 for GRE tunnel 33.
switch(config)# interface tunnel 33 mode gre ipv4 switch(config-gre-if)# destination ip 10.10.10.1
Deletes the destination IP address 10.10.10.1 from GRE tunnel 33.
switch(config)# interface tunnel 33 switch(config-gre-if)# no destination ip 10.10.10.1
Defines the destination IP address to be 10.10.20.1 for IPv6 in IPv4 tunnel 27.
switch(config)# interface tunnel 27 mode ip 6in4 switch(config-ip-if)# destination ip 10.10.20.1
Deletes the destination IP address 10.10.20.1 from IPv6 in IPv4 tunnel 27.
switch(config)# interface tunnel 27 switch(config-ip-if)# no destination ip 10.10.20.1