Policy elements

These policy elements may be statically configured on the switch or dynamically imposed during an authenticated session on the switch using a RADIUS server and 802.1X or MAC authentication. (Web authentication does not apply to VoIP telephones and other telecommunications devices that are not capable of accessing the switch through a Web browser.) The QoS and voice VLAN policy elements can be statically configured with the following CLI commands:

vlan  <VID>  voice

vlan <VID> [tagged|untagged] <PORT-LIST>

int <PORT-LIST>  qos priority  0 - 7 
vlan  vid  qos dscp  codepoint 

A codepoint must have an 802.1p priority before you can configure it for use in prioritizing packets by VLAN-ID. If a codepoint you want to use shows No Override in the Priority column of the DSCP policy table (display with show qos-dscp map, then use qos-dscp map codepoint priority 0 - 7 to configure a priority before proceeding.

For more information on this topic, see the advanced traffic management guide.