Using the WebAgent to configure IP addressing
Using the WebAgent to configure IP addressing
To configure IP addressing on the switch:
Prerequisites
Before you use the WebAgent to configure IP addressing, you must insure the switch has an IP address that is reachable through your network.
Procedure
- In the navigation pane, click Home.
- Click Quick Setup.
- In the Switch Quick Setup Parameters box, click Change.
- Enter the IP address and any other information such as the Subnet mask and Gateway.
- Click Save to save your changes.
- If you need further information on using the WebAgent, click [?] to access the web-based help available for the switch.