Using the menu to configure IP address, Gateway, and Time-To-Live (TTL)
Procedure
- From the Main Menu, select:
2. Switch Configuration... 5. IP Configuration
- If multiple VLANs are configured, a screen showing all VLANs appears. The Menu interface displays the IP address for any VLAN. If you use the CLI to configure the IP address on a VLAN, use the CLI show ip command to list them.
- Press [E] (for Edit).
- If the switch needs to access a router, for example, to reach off-subnet destinations, select the Default Gateway field and enter the IP address of the gateway router.
- If you need to change the packet Time-To-Live (TTL) setting, select Default TTL and type in a value between 2 and 255.
- To configure IP addressing,
select IP Config and do one of the
following:
- If you want to have
the switch retrieve its IP configuration from a DHCP or Bootp server,
at the IP Config
field, keep the value as
DHCP/ Bootpand go to step 8.
- If you want to manually configure the IP information,
use the Space bar to select Manual
and use the
[Tab]key to move to the other IP configuration fields.
- If you want to have
the switch retrieve its IP configuration from a DHCP or Bootp server,
at the
- Select the IP Address field and enter the IP address for the switch.
- Select the Subnet Mask field and enter the subnet mask for the IP address.
- Press [Enter], then [S](for Save).