Using the Switch Setup screen to quickly setup IP addressing

If you just want to give the switch an IP address so that it can communicate on your network, or if you are not using VLANs, Hewlett Packard Enterprise recommends that you use the Switch Setup screen to quickly configure IP addressing.

To use the Switch Setup screen for quickly configuring IP addressing, do one of the following:

Procedure
  1. Enter the setup command at the CLI Manager level prompt: 
    switch# setup
  2. Select 8. Run Setup in the Main Menu of the menu interface.

For more on using the Switch Setup screen, See the Installation and Getting Started Guide you received with the switch.