System attributes
Image Streamer allows you to access the OS volume and iSCSI initiator details using system attributes in Plan Scripts. System attributes have a similar syntax as that of custom attributes. During personalization, the system attributes are retrieved from Image Streamer or HPE OneView and are replaced with the corresponding attributes mentioned in the Plan Script.
- _Target.dev
-
Device id of the OS volume that is mounted during personalization. This system attribute has a fixed value of
/dev/sda
. - _Target.name
-
Name of the OS volume
- _Target.ip
-
IP address of the OS volume
- _Target.port
-
Port of the OS volume. This system attribute has a fixed value of 3260
- _Target.lun
-
The logical unit number of the OS volume. This system attribute has a fixed value of 0.
The system attributes that are supported for accessing iSCSI initiator volume details are:
- _Initiator1.mac
-
MAC address of Initiator 1
- _Initiator1.name
-
IQN of initiator 1
- _Initiator1.ip
-
IP address of Initiator 1
- _Initiator1.netmask
-
Subnet mask of Initiator 1
- _Initiator1.gateway
-
Gateway address of Initiator 1
- _Initiator2.mac
-
MAC address of Initiator 2
- _Initiator2.name
-
IQN of initiator 2
- _Initiator2.ip
-
IP address of Initiator 2
- _Initiator2.netmask
-
Subnet mask of Initiator 2
- _Initiator2.gateway
-
Gateway address of Initiator 2
If the Plan Script contains system attributes that correspond to iSCSI initiator 2 for a single enclosure configuration, they are left unexpanded.