Using Catalyst Copy

Procedure
  1. Click main menu and then Oracle Databases > Databases > Actions > Protect Once.
  2. Select Catalyst Copy from the Protection Type menu.

    Snapshots

    1. Select the SnapShot type from the menu.
    2. Enter a name for the Snapshot.
    3. [Optional] Specify the number of Hours, Days, Weeks, or Months to auto delete the snapshot.
    4. [Optional] Specify the number of Hours, Days, or Weeks until the snapshot deletion has to be prevented.
    5. [Only for Snapshot Type - Online (Hot)] Select or clear Truncate Log as per requirement.
  3. For Express Protect with the source as Snapshot and Target as Auto (default option), perform the following:
    1. Select a target Copy Repositories from the list of storage devices and stores.
    2. Select the Storage System Transport as either Auto, FC, or iSCSI.
    3. Select the StoreOnce Backup Transport as either Auto, FC, or Ethernet.
    4. Select the Backup Type options as per requirement.
    5. Specify the Number of Streams as either Auto or select from the numeric list.
    6. Specify the Express Protect name.
    7. Set the Verify Backup option to On or Off.
    8. [Optional] Specify the number of Hours, Days, Weeks, or Months to auto delete the snapshot.
    9. [Optional] Specify the number of Hours, Days, or Weeks until the snapshot deletion has to be prevented.
  4. For Catalyst Copy with the source as Express Protect and Target as Auto (default option), perform the following:
    NOTE:

    Ensure that a minimum of two HPE StoreOnce systems are registered with RMC.

    1. Select a target Copy Repositories from the list of storage devices and stores.
    2. Select the StoreOnce Replication Transport as either Auto, FC, or Ethernet.
    3. Specify the Catalyst Copy name.
    4. [Optional] Specify the number of Hours, Days, Weeks, or Months to auto delete the snapshot.
    5. [Optional] Specify the number of Hours, Days, or Weeks until the snapshot deletion has to be prevented.
  5. To set up the scheduler for the Catalyst Copy, select Start Date and Time and set the required date and time. Select Now to set the current date and time.
  6. Click Ok.