Edit Federation and Migration Configuration (Smart SAN ports warning)

The federation configuration is using Smart SAN enabled ports that have been zoned with Smart SAN. However, you have chosen to not use Smart SAN ports in the federation configuration.

Important: If you proceed, the Smart SAN ports that are listed will automatically be unzoned. You will then need to manually zone ports for the federation configuration.

Tip: When available, zoning recommendations are shown on the Fiber Channel Zoning panel. You can also check the Recommended Zones view on the Federation Configurations detail pane.

If you do not want to remove the Smart SAN ports from the federation configuration, click Cancel; otherwise, click Yes, continue.