Restoring the HPE StoreEasy system using a DVD or USB drive

Prerequisites
  • Any external storage is disconnected

  • Access to a DVD or USB drive with the HPE StoreEasy system recovery image

Procedure
  1. Do one of the following:
    1. For direct access, insert the System Recovery DVD or the bootable USB drive that contains the system recovery image into the HPE StoreEasy system.
    2. For remote management access, connect to the HPE StoreEasy system using iLO from a client PC. Insert the System Recovery DVD or the bootable USB drive that contains the system recovery image into the HPE StoreEasy system.
  2. Reboot the HPEStoreEasy system and, during the boot, select F11 to manually select the device that has the recovery media.
  3. Select HPE StoreEasy System Recovery.
    IMPORTANT: Do not interrupt the recovery process. When the system recovery is complete, the system reboots.
  4. Remove the DVD or flash drive from the HPE StoreEasy system.
  5. Reconnect any external storage that was detached, and then reboot the HPE StoreEasy system.