Networking

Sample input JSON

The following is the sample input JSON:
"networking": {
			"underlay": [
				{
					"name": "ILO-OOBM",
					"type": "ILO-OOBM",
					"cidr": "XX.XX.XX.XX/XY",
					"gateway": "XX.XX.XX.XX",
					"ip_range_start": "XX.XX.XX.XX",
					"ip_range_end": "XX.XX.XX.XX",
					"vlan": "340",
					"vlan_range": "NA",
					"vxlan": "NA",
					"vxlan_range": "NA",
					"description": "ILO network for manage servers"
				},
				{
					"name": "OAM",
					"type": "OAM",
					"cidr": "XX.XX.XX.XX/XY",
					"gateway": "XX.XX.XX.XX",
					"ip_range_start": "NA",
					"ip_range_end": "NA",
					"vlan": "324",
					"vlan_range": "NA",
					"vxlan": "NA",
					"vxlan_range": "NA",
					"description": "OAM network for manage servers"
				},
				{
					"name": "OCP",
					"type": "OCP",
					"cidr": "XX.XX.XX.XX/XY",
					"gateway": "XX.XX.XX.XX",
					"ip_range_start": "XX.XX.XX.XX",
					"ip_range_end": "XX.XX.XX.XX",
					"vlan": "3401",
					"vlan_range": "NA",
					"vxlan": "NA",
					"vxlan_range": "NA",
					"description": "OCP network for manage servers"
				},
				{
					"name": "PROVIDER-VLAN",
					"type": "PROVIDER-VLAN",
					"cidr": "NA",
					"gateway": "NA",
					"ip_range_start": "NA",
					"ip_range_end": "NA",
					"vlan": "NA",
					"vlan_range": "3450-3460",
					"vxlan": "NA",
					"vxlan_range": "NA",
					"description": "Provider-vlan network for manage servers"
				}
			],
			"description": "List of all networking information configured"
		},

Parameters

The following table describes the parameters in the underlay subsection with the example values:

NOTE:

The details of the ILO-OOBM network are provided as an example in the following table. The remaining networks are similarly configured.

Table 13: Underlay
Parameters Description
underlay Underlay is the Layer 3 (L3) IP network that routes VXLAN packets as normal IP traffic.
name Enter the descriptive name of the corresponding network.
NOTE:

We recommend not to use the same name for multiple networks.

type Specifies the type of network ILO-OOBM or OCP or OAM or Provider-VLAN.
cidr Enter the cidr value based on the customer input.
gateway Enter the gateway value based on the network.
ip_range_start Enter the IP address range based on the server and switch counts.
NOTE:

This parameter is applicable only to the ILO-OOBM network.

ip_range_end
Enter the IP address range based on the server and switch counts.
NOTE:

This parameter is applicable only to the ILO-OOBM network.

vlan Enter the vlan value based on the customer input.
vlan_range The total range of the VLANs that can be used.
NOTE:

This parameter is applicable only to the PROVIDER-VLAN network.

vxlan Enter the vxlan value based on the customer input.
vxlan_range The total range of the VxLANs that can be used.
description

Enter the description of the corresponding network.