HPE Converged Solution 750 Interactive Compatibility Matrix
HPE Converged Solution 750 3.x for Synergy and VMware (July 2018)
SPP2018.03.0
The table below lists the software and firmware versions for the HPE CS750 3.x for Synergy and VMware. Before upgrading, read this important information.
| Component | Current version |
|---|---|
| Service Pack for ProLiant firmware versions | |
| HPE Service Pack for ProLiant (Gen10) | 2018.03.0 |
| HPE Smart Update Manager (SUM) | 8.2 |
| System ROM HPE ProLiant DL360 Gen10 | 1.36 |
| HPE Integrated Lights-Out 5 (iLO5) (Gen10) | 1.20 |
| HPE Smart Array P408i-a SR Gen10 Controller (DL360 Gen10) | 1.34 |
| HPE Ethernet 1Gb 4-port 331i/T Adapter (Broadcom) (DL360 Gen10) | 20.8.41 |
| HPE FlexFabric 10Gb 2P 534FLR-SFP+ Adapter (Qlogic) (DL360 Gen10) | 7.15.97 |
| HPE SN1100Q 16Gb 2p FC HBA (DL360 Gen10) | 8.05.64 |
HPE Ethernet 10Gb 2P 530SFP+ Adapter (Qlogic) (DL360 Gen10) Note: Used with vCenter High Availability (vCHA) only. | 7.15.97 |
| Synergy Software Release firmware versions | |
| HPE Custom Synergy SPP | 2018.03.20180508 |
| System ROM HPE Synergy 480 Gen10 | 1.36 |
| HPE Integrated Lights-Out 5 (iLO5) (Gen10) | 1.22 |
| Smart Array Gen10 P204i-c SR
Note: Used with local internal integrated RAID1 boot devices. | 1.34 |
| Smart Array Gen10 P416ie-m SR
Note: Required for D3940 deployment. | 1.34 |
| System Programmable Logic Device (CLPD)
(HPE Synergy 480 Gen10) Note: Refer to the following Customer Advisory: https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00045812en_us | 0x0B |
| HPE Synergy 3820C 20Gb CNA | 7.15.97 |
| HPE Synergy 3830C 16G FC HBA
Note: Optional component with FC deployment. | 6.01.50 |
| HPE VC SE 40GbF8 Module | 1.2.2.1001 |
| HPE VC SE 16Gb FC Module
Note: Optional component with FC deployment. | 4.00.33 |
| HPE Synergy 12Gb SAS Connection Module
Note: Required for D3940 deployment. | 1.2.4.0 |
| HPE Synergy D3940 Storage Module | 2.07 |
| HPE Synergy 20Gb Interconnect Link Module | 1.08 |
| HPE Synergy Frame Link Module | 2.02.02 |
| Gen10 Power PIC | 1.0.4 |
| Intelligent Provisioning (Gen10) | 3.10 |
| Infrastructure firmware versions | |
| HPE FlexFabric 5940 Switch (JH397A) | 5940_7.10.R2610 |
| HPN 5900 Switch (JG510A) | 5900AF-5920AF_7.10R2432P05 |
| Arista 7160 (JH948A) | 4.20.4F |
| Arista 7010T (JH594A) | 4.20.4F |
| Cisco Nexus 93180YC | Nexus OS Version 7.0(3).I4(8) |
| Cisco Nexus 3048TP | Nexus OS Version 7.0(3).I4(8) |
| HPE SN B-Series Fibre Channel Switch (SN6600B) | 8.1.2a |
| HPE G2 Metered and Switches PDUs | 2.0.0.1 |
| Infrastructure software which must be updated to be in compliance with this compatibility matrix | |
| HPE Insight Remote Support | 7.9 |
| 3PAR software | |
| HPE 3PAR OS (StoreServ 8000) | 3.2.2 MU6+P96+P99 (all patches)
CLI Server: 3.2.2.709 System Manager: 3.2.2.725 Kernel: 3.2.2.709 TPD Code: 3.2.2.709 TPD Patch: 3.2.2.725 |
| HPE 3PAR OS (StoreServ 9000) | 3.3.1 EMU1+P19+P21+P25 (all patches)
CLI Server: 3.3.1.269 System Manager: 3.3.1.362 Kernel: 3.3.1.269 TPD Code: 3.3.1.315 TPD Patch: 3.3.1.362 |
| HPE 3PAR Virtual/Physical Service Processor (StoreServ 8000)
Note: Virtual Service Processor 4.4 MU6 is not supported on ESXi 6.5. | 4.4 MU6 (all patches) |
| HPE 3PAR Virtual/Physical Service Processor (StoreServ 9000) | 5.0.3 MU3 (all patches) |
| HPE 3PAR StoreServ Management Console (SSMC) | SSMC 3.3.1 |
| HPE 3PAR CLI (StoreServ 8000) | 3.2.2 MU6 |
| HPE 3PAR CLI (StoreServ 9000) | 3.3.1 EMU1 |
| HPE 3PAR SNMP Agent (StoreServ 8000) | 1.8.0 |
| HPE 3PAR SNMP Agent (StoreServ 9000) | 1.10.0 |
| HPE Nimble software | |
| HPE Nimble OS | 5.0.3 |
| HPE Nimble Windows Toolkit | 5.0.0.7991 |
| HPE Nimble Connection Manager (NCM) for VMware 6.0 | 5.1.0 ( nimble-ncm-for-esx6-5.1.0-600006.zip) |
| HPE Nimble Connection Manager (NCM) for VMware 6.5 | 5.1.0 ( nimble-ncm-for-esx6.5-5.1.0-650006.zip) |
| HPE OneView software | |
| HPE OneView (Composer) | 4.00.10 |
| HPE Synergy Image Streamer
Note: Nimble iSCSI is not supported with HPE Image Streamer. | 4.00.06 |
| HPE Image Streamer Artifact Bundle
Note: HPE recommends to always use the latest artifacts that are available at https://github.hpe.com/ImageStreamer/image-streamer-esxi/tree/master/artifact-bundles | HPE-ESXi-2018-05-10-v4.0.zip |
| HPE OneView (Virtual Appliance) | 4.00.10 |
| HPE OneView Global Dashboard | 1.40 |
| HPE B-series SAN Network Advisor
Note: Utilized by HPE OneView for SAN provisioning in a SAN Switched Environment with 3PAR deployment - not utilized in Storage Direct-Attach (Flat-SAN) connectivity. | 14.2.2 |
| Java Runtime Environment (for HPE B-series SAN Network Advisor) | 1.8u112 |
| VMware for Cx750 software versions | |
| HPE OEM Customized vSphere Recipe (Gen10) | May2018VMwareRecipeSPP201803_3.2.pdf
(http://vibsdepot.hpe.com/hpq/recipes/May2018VMwareRecipeSPP201803_3.2.pdf) |
| VMware vCenter Server 6.5 (Appliance)
Note: Distribution for a new vCenter Appliance installation. | 6.5 Update 1g
(Build: 8024368 ISO Build: 8024368 VMware-VCSA-all-6.5.0-8024368.iso) |
| VMware vCenter Server patch bundle 6.5 (Appliance)
Note: Distribution for upgrading previously installed vCenter Appliance only. | VMware-vCenter-Server-Appliance-6.5.0.15000-8024368-patch-FP.iso |
| VMware vSphere 6.0 | 6.0 Update 3e (Build: 7967664) |
| HPE OEM Customized vSphere Distribution 6.0 | VMware-ESXi-6.0.0-Update3-6921384-HPE-600.10.2.0.23-Feb2018.iso |
| VMware vSphere 6.0 patch bundle
Note: The patch bundle should be applied to the HPE OEM Customized vSphere Distribution. | ESXi600-201803001.zip |
| VMware vSphere 6.5 | 6.5 Update 1g
(Build: 7967591 ) |
| HPE OEM Customized vSphere Distribution 6.5 | VMware-ESXi-6.5.0-Update1-7388607-HPE-650.U1.10.2.0.23-Feb2018.iso |
| VMware vSphere 6.5 patch bundle 3 | ESXi650-201803001.zip |
| VMware vSphere 6.5 Hotfix for smartpqi driver
Note: Component is not contained in the HPE OEM VMware custom image or the patch bundle. It must be applied separately following the patch bundle. | VMW-ESX-6.5.0-smartpqi-1.0.1.254-8060504.zip |
| VMware vRealize Operations Manager | 6.6.1 |
| HPE OneView for VMware vCenter | 9.0 |
| HPE Recovery Manager Central
Note: Used with HPE 3PAR deployment only. | 5.0.1 |
| HPE OneView for vRealize Operations | 2.1.3 |
| Microsoft Windows Server (Windows Mgmt VMs) | 2012 R2
(Standard Edition) |
| HPE Smart Array P408i-a SR vSphere 6.0 | FW: 1.34 Driver: 1.0.1.244
(smartpqi) |
| HPE Smart Array P408i-a SR vSphere 6.5 | FW: 1.34
Driver: 1.0.1.254 (smartpqi) |
| HPE Ethernet 1Gb 4-port 331i/T Adapter vSphere 6.0 | FW:20.8.41
Driver: 3.137l.v60.1 (tg3) |
| HPE Ethernet 1Gb 4-port 331i/T Adapter vSphere 6.5 | FW:20.8.41
Driver: 4.1.3.0 (ntg3) |
| HPE FlexFabric 534FLR-SFP+ vSphere 6.0 | FW: 7.15.97
Driver: 2.713.60.v60.1 (bnx2x) Driver: 1.713.60.v60.1 (bnx2fc) Driver: 2.713.60.v60.1 (bnx2i) |
| HPE FlexFabric 534FLR-SFP+ vSphere 6.5 | FW: 7.15.97
Driver: 1.0.60.0 (qfle3) Driver: 1.0.45.0 (qfle3f) Driver: 1.0.13.0 (qfle3i) |
| HPE SN1100Q 16Gb 2p FC HBA vSphere 6.0 | FW: 8.05.64
Driver: 2.1.57.1 (qlnativefc) |
| HPE SN1100Q 16Gb 2p FC HBA vSphere 6.5 | FW: 8.05.64
Driver: 2.1.57.1 (qlnativefc) |
| HPE Ethernet 530SFP+ vSphere 6.0 | FW: 7.15.97
Driver: 2.713.60.v60.1 (bnx2x) |
| HPE Ethernet 530SFP+ vSphere 6.5 | FW: 7.15.97 Driver: 1.0.60.0
(qfle3) |
| Smart Array Gen10 P204i-c SR vSphere 6.0 | FW: 1.34 Driver: 1.0.1.244
(smartpqi) |
| Smart Array Gen10 P204i-c SR vSphere 6.5 | FW: 1.34 Driver: 1.0.1.254
(smartpqi) |
| Smart Array Gen10 P416ie-m SR vSphere 6.0 | FW: 1.34 Driver: 1.0.1.244
(smartpqi) |
| Smart Array Gen10 P416ie-m SR vSphere 6.5 | FW: 1.34 Driver: 1.0.1.254
(smartpqi) |
| HPE Synergy 3820C 20Gb CNA vSphere 6.0 | FW: 7.15.97
Driver: 2.713.60.v60.1 (bnx2x) Driver: 1.713.60.v60.1 (bnx2fc) Driver: 2.713.60.v60.1 (bnx2i) |
| HPE Synergy 3820C 20Gb CNA vSphere 6.5 | FW: 7.15.97
Driver: 1.0.60.0 (qfle3) Driver: 1.0.45.0 (qfle3f) Driver: 1.0.13.0 (qfle3i) |
| HPE Synergy 3830C 16G FC HBA vSphere 6.0 | FW: 6.01.50
Driver: 2.1.57.1 (qlnativefc) |
| HPE Synergy 3830C 16G FC HBA vSphere 6.5 | FW: 6.01.50
Driver: 2.1.57.1 (qlnativefc) |
| Adobe Flash Player (for VMware Web Client) | 23.0 (vsphere 6.5) |