HPE Converged Solution 750 Interactive Compatibility Matrix
HPE Converged Solution 750 3.x for Synergy Foundation (September 2018)
The table below lists the software and firmware versions for the HPE CS750 3.x for Synergy Foundation. Before upgrading, read this important information.
| Component | Current version |
|---|---|
| Service Pack for ProLiant firmware versions for infrastructure components | |
| HPE Service Pack for ProLiant (Gen10)
Note: Cx750 Custom ISO (SPP2018.09.0+SUM8.3.6) | 2018.10.03.01 (SPP201809-Cx750-Sept2018-03Oct1600.iso) |
| Smart Update Manager (SUM) | 8.3.6 |
| System ROM HPE ProLiant DL360 Gen10 Server | 1.42 |
| HPE Integrated Lights-Out 5 (iLO5) (Gen10) | 1.35 |
Server Platform Services (SPS) (DL360 Gen10) Note: Refer to the following Security Bulletin: (https://support.hpe.com/hpsc/doc/public/display?docId=hpesbhf03873en_us ) | 4.04.393 |
| HPE Smart Array P408i-a SR Gen10 Controller (DL360 Gen10) | 1.65 |
| HPE Ethernet 1Gb 4-port 331i/T Adapter (Broadcom) (DL360 Gen10) | 20.12.41 |
| HPE FlexFabric 10Gb 2P 534FLR-SFP+ Adapter (Qlogic) (DL360 Gen10) | 7.17.19 |
| HPE SN1100Q 16Gb 2p FC HBA (DL360 Gen10) | 8.07.16 |
| HPE Ethernet 10Gb 2P 530SFP+ Adapter (Qlogic) (DL360 Gen10)
Note: Used with vCenter High Availability (vCHA) only. | 7.17.19 |
| Synergy Software Release firmware versions | |
| HPE Custom Synergy SPP (VMw6.0) | 2018.09.28.00
( SPP_2018.03.20180928_for_HPE_Synergy_Z7550-96561.iso) |
| HPE Custom Synergy SPP (VMw6.5) | 2018.09.19.00
(SPP_2018.09.20180919_for_HPE_Synergy_Z7550-96560.iso) |
| System ROM HPE Synergy 480 Gen10 Compute Module (VMw6.0) | 1.36 |
| System ROM HPE Synergy 480 Gen10 Compute Module (VMw6.5) | 1.42 |
| HPE Integrated Lights-Out 5 (iLO5) (Gen10) (VMw6.0) | 1.30 |
| HPE Integrated Lights-Out 5 (iLO5) (Gen10) (VMw6.5) | 1.35 |
Server Platform Services (SPS) (HPE Synergy 480 Gen10) Note: Refer to the following Security Bulletin: https://support.hpe.com/hpsc/doc/public/display?docId=hpesbhf03873en_us | 4.0.4.393 |
| HPE Smart Array Gen10 P204i-c SR (VMw6.0)
Note: Used with local internal integrated RAID1 boot devices. | 1.60 |
| Smart Array Gen10 P204i-c SR (VMw6.5)
Note: Used with local internal integrated RAID1 boot devices. | 1.65 |
| HPE Smart Array Gen10 P416ie-m SR (VMw6.0) Note: Required for D3940 deployment. | 1.60 |
| HPE Smart Array Gen10 P416ie-m SR (VMw6.5)
Note: Required for D3940 deployment. | 1.65 |
| System Programmable Logic Device (CPLD) (HPE Synergy 480 Gen10)
Note: Refer to the following Customer Advisory: https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00045812en_us | 0x0B |
| HPE Synergy 3820C 20Gb CNA (VMw6.0) | 7.15.97 |
| HPE Synergy 3820C 20Gb CNA (VMw6.5) | 7.17.19 |
| HPE Synergy 3830C 16G FC HBA (VMw6.0)
Note: Optional component with FC deployment. | 6.01.50 |
| HPE Synergy 3830C 16G FC HBA (VMw6.5)
Note: Optional component with FC deployment. | 6.01.59 |
| HPE VC SE 40GbF8 Module (VMw6.0) | 1.2.3.1001 |
| HPE VC SE 40GbF8 Module (VMw6.5) | 1.3.1.1003 |
| HPE VC SE 16Gb FC Module (VMw6.0) Note: Optional component with FC deployment. | 4.00.33 |
| HPE VC SE 16Gb FC Module (VMw6.5) Note: Optional component with FC deployment. | 4.10.50 |
| HPE Synergy 12Gb SAS Connection Module (VMw6.0) Note: Required for D3940 deployment. | 1.2.4.0 |
| HPE Synergy 12Gb SAS Connection Module (VMw6.5) Note: Required for D3940 deployment. | 1.4.6.0 |
| HPE Synergy D3940 Storage Module | 2.07 |
| HPE Synergy 20Gb Interconnect Link Module (VMw6.0) | 1.08 |
| HPE Synergy 20Gb Interconnect Link Module (VMw6.5) | 1.16 |
| HPE Synergy Frame Link Module | 2.02.03 |
| Gen10 Power PIC | 1.0.4 |
| Intelligent Provisioning (Gen10) (VMw6.0) | 3.10 |
| Intelligent Provisioning (Gen10) (VMw6.5) | 3.20 |
| Infrastructure firmware versions | |
| HPE FlexFabric 5940 Switch (JH397A) | 5940_7.10.R2612P01 |
| HPN 5900 Switch (JG510A) | 5900AF-5920AF_7.10R2432P05 |
| Arista 7160 (JH948A) | 4.20.7M |
| Arista 7010T (JH594A) | 4.20.7M |
| Cisco Nexus 93180YC | Nexus OS Version 7.0(3).I4(8a) |
| Cisco Nexus 3048TP | Nexus OS Version 7.0(3).I4(8a) |
| HPE SN B-Series Fibre Channel Switch (SN6600B) | 8.2.0b |
| HPE G2 Metered and Switches PDUs | 2.0.0.1 |
| Infrastructure software versions | |
| HPE Insight Remote Support | 7.9 |
| 3PAR software versions | |
| HPE 3PAR OS
(StoreServ 8000) | 3.2.2 MU6 +P99+P107+P115+ P119+P122+P126
(all patches) CLI Server: 3.2.2.750 System Manager: 3.2.2.758 Kernel: 3.2.2.709 TPD Code: 3.2.2.709 TPD Patch: 3.2.2.750 |
| HPE 3PAR OS
(StoreServ 9000) | 3.3.1 MU2+P30+P32+P34+ P37+P38
(all patches) CLI Server: 3.3.1.410 System Manager: 3.3.1.454 Kernel: 3.3.1.410 TPD Code: 3.3.1.410 TPD Patch: 3.3.1.454 |
| HPE 3PAR Virtual/Physical Service Processor
(StoreServ 8000) Note: Virtual Service Processor 4.4 is not supported on ESXi 6.5. | 4.4 MU7
(all patches) |
| HPE 3PAR Virtual/Physical Service Processor
(StoreServ 9000) | 5.0.4
(all patches) |
| HPE 3PAR StoreServ Management Console (SSMC) | SSMC 3.4 |
| HPE 3PAR CLI
(StoreServ 8000) | 3.2.2 MU6 |
| HPE 3PAR CLI
(StoreServ 9000) | 3.3.1 MU2 |
| HPE 3PAR SNMP Agent
(StoreServ 8000) | 1.8.0 |
| HPE 3PAR SNMP Agent
(StoreServ 9000) | 1.10.0 |
| HPE Nimble software versions | |
| HPE Nimble OS | 5.0.4.0 |
| HPE Nimble Windows Toolkit | 5.0.0.7991 |
| HPE OneView software versions | |
| HPE OneView (Composer)
(VMw6.0) | 4.00.11 |
| HPE OneView (Composer)
(VMw6.5) | 4.10.03 |
| HPE Synergy Image Streamer
(VMw6.0) Note: Nimble iSCSI is not supported with HPE Image Streamer on ESXi 6.0. | 4.00.07 |
| HPE Synergy Image Streamer
(VMw6.5) | 4.10.04 |
| HPE OneView (Virtual Appliance)
(VMw6.0) | 4.00.11 |
| HPE OneView (Virtual Appliance)
(VMw6.5) | 4.10.03 |
| HPE OneView Global Dashboard | 1.50 |
| HPE B-series SAN Network Advisor
Note: Utilized by HPE OneView for SAN provisioning in a SAN Switched Environment with 3PAR deployment - not utilized in Storage Direct-Attach (Flat-SAN) connectivity. | 14.4.2 |
| Java Runtime Environment (for HPE B-series SAN Network Advisor) | 1.8u112 |