In the default configuration on a VLAN, any one of the following commands enables IPv6 and creates a link-local address. Thus, while any one of these methods is configured on a VLAN, IPv6 remains enabled and a link-local address is present.
-
(See Enabling IPv6 with an automatically configured link-local address.)
-
(See Enabling autoconfiguration of a global unicast address and a default router identity on a VLAN.)
-
ipv6 address dhcp full [rapid-commit]
(See Enabling DHCPv6.)
|
|
NOTE: Addresses created by any of these methods remain tentative until verified as unique by Duplicate Address Detection (DAD). See Duplicate Address Detection (DAD). |
|
|