To configure a DHCP server for AirWave, from a Windows Server 2008, do the following steps:
-
The Predefined Options and Values screen is displayed. Click Add....
-
Enter the desired Name (any), Data type (select String), Code (enter 60), and Description (any).
-
From the Predefined Options and Values screen, under Value, enter the String ArubaInstantAP. The string is case sensitive and must be
ArubaInstantAP
. -
Under IPv4, expand Scope. Right click on Scope Options and select Configure Options...
-
Under the General tab, select 043 Vendor Specific Info. The Data entry data appears. Under ASCII, enter hpeSwitch:hp2920,90.1.1.10,admin. The ASCII value has the following format:
<Group>:<Topfolder>,<AMP IP>,<shared secret>
If you need to add sub-folders, use the following format:
<Group>:<Topfolder>:<folder1>,<AMP IP>,<shared secret>
-
Under the General tab, select 060 Airwave. Click OK.
NOTE: No changes are required to the 060 option.
-
You can verify the AirWave details as follows:
switch# show amp-server switch# show run