To apply a zone policy to a ONE Application, you can complete one of the following steps:
-
Enter the
zone-service-policy
command on the HP 8200zl or 5400zl switch -
Use the ONE application's management interface to apply the zone policies
To apply zone policies through the ONE application, consult the HP Installation and Getting Started Guide for that application.
To apply a zone service policy from the switch CLI, enter the following command from the global configuration context.
Syntax:
[no] zone-service-policy
[ policy-name
zone
enable
| disable
| update
]
[Ethernet] bind
logical port
appname
application name
appinstance
instance description
[ fail-action
[ bypass
| block
]] [ expire
[ app-down
| permanent
| slot-down
]]
Applying a zone policy
The following example shows how to apply a zone policy:
HP Switch(config)#: zone-service-policy Firewall zone enable bind F1 appname
Verify that the zone policy is associated with the ONE application by entering the following command:
hostswitch#: show ONE_app slot_ID
Replace
with the slot in which the AllianceONE Extended Services zl Module is installed.slot_ID