These CLI commands allow the user to configure IGMP.
Syntax
Displays IGMP status for all VLANs with IGMP enabled on the switch unless a specified VLAN has been given.
Example: show ip igmp
IGMP Service Protocol Info
Total VLAN’s with IGMP enabled: 33
Current count of Multicast groups joined: 21
VLAN ID: 1
VLAN Name: DEFAULT_VLAN
IGMP Version: 2
Querier Address [this switch]: 10.0.102.221
Querier Up Time: 1hr 53min 2sec
Querier Expiry Time: 2min 1sec
Ports with multicast routers: A1, A3-A5
Active Group Addresses |Type| Expires | Ports | Reports | queries |
--------------------------------+----+--------------------------------
xxx.xxx.xxx.xxx |filt| 1min 2sec | A1 | 20 | 20 |
xxx.xxx.xxx.xxx |std | 3min 2sec | all
xxx.xxx.xxx.xxx |filt| 23min 3sec | A1-B3, C4 | 20 | 20 |
xxx.xxx.xxx.xxx |filt| 23min 10sec| A1,B2,C5 | 20 | 20 |
xxx.xxx.xxx.xxx |filt| 2min 5sec | F22 | 20 | 20 |
xxx.xxx.xxx.xxx |stat| 0min 0sec | all | 20 | 20 |
Active Group Addresses |Type| Expires | Ports
----------------------------+----+--------------------------------
xxx.xxx.xxx.xxx |filt| 1min 2sec | A1
xxx.xxx.xxx.xxx |std | 3min 2sec | all
xxx.xxx.xxx.xxx |filt| 23min 3sec | A1-B3, C4
xxx.xxx.xxx.xxx |filt| 23min 10sec| A1,B2,C5
xxx.xxx.xxx.xxx |filt| 2min 5sec | F22
VLAN ID: 200
VLAN Name: client vlan
IGMP Version: 2
Querier Address: 10.0.102.204
Querier Port: 4
<only displayed when not querier>
Querier Up Time: 1hr 53min 2sec
Querier Expiry Time: 2min 1sec
Ports with multicast routers: A1, A3-A5
Active Group Addresses |Type| Expires | Ports
----------------------------+----+--------------------------------
xxx.xxx.xxx.xxx |filt| 1min 2sec | A1
xxx.xxx.xxx.xxx |std | 3min 2sec | all
xxx.xxx.xxx.xxx |filt| 23min 3sec | A1-B3, C4
xxx.xxx.xxx.xxx |stat| 0min 0sec | A1,B2,C5
xxx.xxx.xxx.xxx |filt| 2min 5sec | F22
show ip igmp vlan 200
IGMP Service Protocol Info
Total VLAN’s with IGMP enabled: 33
Current count of Multicast groups joined: 21
VLAN ID: 200
VLAN Name: client vlan
IGMP Version: 2
Querier Address: 10.0.102.204
Querier Port: 4
<only displayed when not querier>
Querier Up Time: 1hr 53min 2sec
Querier Expiry Time: 2min 1sec
Ports with multicast routers: A1, A3-A5
Active Group Addresses |Type| Expires | Ports
----------------------------+----+--------------------------------
xxx.xxx.xxx.xxx |filt| 1min 2sec | A1
xxx.xxx.xxx.xxx |std | 3min 2sec | all
xxx.xxx.xxx.xxx |filt| 23min 3sec | A1-B3, C4
xxx.xxx.xxx.xxx |stat| 0min 0sec | A1,B2,C5
xxx.xxx.xxx.xxx |filt| 2min 5sec | F22
Syntax
Global command listing IGMP status for all VLANs configured in the switch.
IGMP Service Config Control unknown multicast [Yes]: Yes Forced fast leave timeout [0]: 0 Delayed flush timeout [0]: 0 VLAN ID|VLAN NAME |IGMP Enabled|Querier Allowed | Querier Interval | -------+--------------------------------+-----------+---------------------- 1 |DEFAULT_VLAN |No |Yes | 125 | 200 |client vlan |Yes |No | 125 | 300 |Data Centre |Yes |Yes | 125 |
Syntax
Displays IGMP configuration for a specific VLAN on the switch, including per-port data.
IGMP Service Vlan Config
VLAN ID: 300
VLAN NAME: VLAN300
IGMP Enabled [No]: Yes
Querier Allowed [Yes]: Yes
Port| Type | Port Mode | Forced Fast Leave | Fast Leave----+---------------+ ----------+-------------------+-----------------
5 |100/1000T | Auto | No | Yes
6 |100/1000T | Forward | No | Yes
8 |100/1000T | Blocked | Yes | No
(
all ports on vlan shown)
Syntax
Lists the ports currently joined for a specified group, with port type, port mode, Age Timer data and Leave Timer data. If the group is not specified, all groups are shown.
Example: Filtered group
IGMP Service Protocol Group Info VLAN ID: 300 VLAN NAME: VLAN300 Filtered Group Address: xxx.xxx.xxx.xxx Last Reporter: xxx.xxx.xxx.xxx Up Time: 4 hr 4 min 2 sec Port| Port Type | Port Mode | Expires | Access ----+---------------+ ----------+------------------------------------------- 5 |100/1000T | Auto | 1min 3 sec | Host 6 |100/1000T | Forward | 2min 44 sec | Router 8 |100/1000T | Blocked | 24 sec | Host-Router Filtered Group Address: xxx.xxx.xxx.xxx Last Reporter: xxx.xxx.xxx.xxx Up Time: 4 hr 4 min 2 sec Port| Port Type | Port Mode | | Expires | Access ----+---------------+ ----------+------------------------------------------------------------ 5 |100/1000T | Auto | 1min 3 sec | Host 6 |100/1000T | Forward | 2min 44 sec | Router 8 |100/1000T | Blocked | 24 sec | Host-Router
Example: Standard group
IGMP Service Protocol Group Info Standard Group Address: xxx.xxx.xxx.xxx Last Reporter: xxx.xxx.xxx.xxx Expiry Time: 2min 10 sec Up Time: 4 hr 4 min 2 sec
Example: Static group
IGMP Service Protocol Group Info Static Group Address: xxx.xxx.xxx.xxx Last Reporter: xxx.xxx.xxx.xxx /*<if joined groups are there else null>*/ Expiry Time: 0min 0sec Up Time: 4 hr 0 min 0 sec
Syntax
Displays IGMP group address information.
VLAN ID Group Address Expires UpTime Last Reporter | Type ------- ------------- --------------- --------------- --------------- + ------ 2 226.0.6.7 0h 2m 58s 1h 13m 4s 192.168.0.2 | Filter 2 226.0.6.8 0h 2m 58s 1h 13m 4s 192.168.0.2 | Standard 2 226.0.6.9 0h 2m 58s 1h 13m 4s 192.168.0.2 | Static