Enter the following command with the L4-based
option to enable load balancing on Layer 4 information when it is present.
Syntax
trunk-load-balance
[ L3-based
| L4-based
]
When the L4-based
option is configured, enables load balancing based on Layer 4 information if it is present. If it is not present, Layer 3 information is used if present; if Layer 3 information is not present, Layer 2 information is used. The configuration is executed in global configuration context and applies to the entire switch.
L3-based |
Load balance on Layer 3 information if present, or Layer 2 information. |
L4-based |
Load balance on Layer 4 port information if present, or Layer 3 if present, or Layer 2. |
Default: L3-based load balancing