switchto mdc
Use switchto mdc to log in to a non-default MDC from the system view of the default MDC and enter MDC user view.
Syntax
switchto mdc mdc-name
Views
System view
Predefined user roles
network-admin
network-operator
Parameters
mdc-name: Specifies the MDC name, a case-sensitive string of 1 to 15 characters. The MDC must have already been started.
Usage guidelines
You use this command to log in only to an MDC that is in active state.
Examples
# Log in to MDC sub1 from the system view of the default MDC. Then, you can stop the automatic configuration procedure as prompted to enter user view of the MDC and execute commands.
<Sysname> system-view [Sysname] switchto mdc sub1 ****************************************************************************** * Copyright (c) 2010-2017 Hewlett Packard Enterprise Development LP * * Without the owner's prior written consent, * * no decompiling or reverse-engineering shall be allowed. * ****************************************************************************** Automatic configuration is running, press CTRL_D to break or press CTRL_B to switch back to the default MDC. <Sysname> <Sysname> display mdc ID Name Status 2 sub1 active
Related commands
switchback