display mdc

Use display mdc to display MDCs and their status.

Syntax

display mdc [ name mdc-name ]

Views

Any view

Predefined user roles

network-admin

network-operator

mdc-admin

mdc-operator

Parameters

name mdc-name: Specifies an MDC by its name, a case-sensitive string of 1 to 15 characters. If you do not specify this option, the command displays all MDCs.

Examples

# Display all MDCs.

<Sysname> display mdc
ID         Name            Status
1          Admin           active
2          sub1            inactive

Table 44: Command output

Field	Description
Status	Status of the MDC: inactive—The MDC is stopped or not started yet. starting—The device is executing the mdc start command to start the MDC. active—The MDC is operating correctly. updating—The device is executing the location command to authorize the MDC to use an LPU. stopping—The device is executing the undo mdc start command to stop the MDC.

Field

Description

Status

Status of the MDC:

inactive—The MDC is stopped or not started yet.
starting—The device is executing the mdc start command to start the MDC.
active—The MDC is operating correctly.
updating—The device is executing the location command to authorize the MDC to use an LPU.
stopping—The device is executing the undo mdc start command to stop the MDC.

Related commands

mdc

prev	up	next
allocate interface	home	display mdc interface