display transceiver interface
Use display transceiver interface to display the key parameters of transceiver modules.
Syntax
display transceiver interface [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
interface-type interface-number: Specifies an interface by its type and number. If you do not specify this option, the command displays the key parameters of every transceiver module.
Examples
# Display the key parameters of the transceiver module in interface FortyGigE 1/0/1.
<Sysname> display transceiver interface fortygige 1/0/1 FortyGigE1/0/1 transceiver information: Transceiver Type : 40G_BASE_SR4_QSFP_PLUS Connector Type : MPO Wavelength(nm) : 850 Transfer Distance(m) : 100(OM3) Digital Diagnostic Monitoring : YES Vendor Name : HPE
Table 40: Command output
Field | Description |
---|---|
transceiver information | Transceiver information. |
Transceiver Type | Transceiver type. |
Connector Type | Connector type options:
|
Wavelength(nm) |
|
Transfer Distance(xx) | Transfer distance, with "xx" representing the distance unit: km (kilometers) for single-mode transceiver modules and m (meters) for other transceiver modules. If the transceiver module supports multiple transfer media, the transfer distances are separated by commas. The transfer medium is included in the bracket following the transfer distance value. The following are the transfer media:
|
Digital Diagnostic Monitoring | Support for digital diagnosis:
|