display install active
Use display install active to display active software images.
Syntax
display install active [ chassis chassis-number slot slot-number ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The chassis-number argument represents the member ID of the IRF member device. The slot-number argument represents the slot number of the card. If you do not specify a card, this command displays information for all cards.
verbose: Displays detailed information. If you do not specify this keyword, the command displays only the names of the active software images.
Examples
# Display detailed information about active software images.
<Sysname> display install active verbose Active packages on chassis 1 slot 11: flash:/boot.bin [Package] Vendor: HPE Product: xxxx Service name: boot Platform version: 7.1.022 Product version: Test 2201 Patch version: 000 Supported board: mpu PkgTime: Sep 25 2011 10:16:31 Version type: debug [Component] Component: boot Description: boot package Software image signature: HP flash:/system.bin [Package] Vendor: HPE Product: xxxx Service name: system Platform version: 7.1.022 Product version: Test 2201 Patch version: 000 Supported board: mpu Version type: debug [Component] Component: system Description: system package Software image signature: HP
Table 22: Command output
Field | Description |
---|---|
Active packages on chassis m slot n | Active software images on the card in the specified slot of the specified member. |
[Package] | Detailed information about the software image. |
Service name | Image type:
|
Supported board | Cards supported by the software image (the values vary with device models):
|
[Component] | Information about components included in the image file. |
Software image signature | Signature for the software image:
The Comware system can be upgraded from a version with the HP or HP-US signature to a version with the HPE signature. To upgrade the Comware system from a version without a signature to a version with the HPE signature, you must first complete one of the following tasks:
|
Related commands
install active