version check ignore
Use version check ignore to disable startup software version check for the standby MPU at startup.
Use undo version check ignore to enable this feature.
Syntax
version check ignore
undo version check ignore
Default
The startup software images on the standby MPU are checked for version inconsistency with the current software images on the active MPU.
Views
System view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
This command is available only for the HPE 7910 and HPE 7910 TAA switches in standalone mode.
When the standby MPU starts up, this command disables the system to examine the standby MPU's startup software images for version inconsistency with the active MPU's current software images. The standby MPU can start up with a different software version than the active MPU.
The startup software version check function might fail to work because the software versions of the MPUs are incompatible.
To avoid problems, do not disable startup software version check for the standby MPU unless for software upgrade.
To make sure the standby MPU always runs the same software images as the active MPU, configure both the version auto-update enable command and the undo version check ignore command.
Examples
# Enable startup software version check for the standby MPU.
<Sysname> system-view [Sysname] undo version check ignore
Related commands
version auto-update enable