backup startup-configuration
Use backup startup-configuration to back up the main next-startup configuration file to a TFTP server.
Syntax
backup startup-configuration to tftp-server [ dest-filename ]
Views
User view
Predefined user roles
network-admin
mdc-admin
Parameters
tftp-server: Specifies a TFTP server by its IPv4 address or host name. The host name is a case-insensitive string of 1 to 253 characters. Valid characters include letters, digits, hyphens (-), underscores (_), and dots (.).
dest-filename: Specifies the target file name used for saving the file on the server. The file name must use the .cfg extension. If you do not specify a target file name, the source file name is used.
Usage guidelines
This command is not supported in FIPS mode.
Examples
# Back up the main next-startup configuration file to the TFTP server at 2.2.2.2, and set the target file name to 192-168-1-26.cfg.
<Sysname> backup startup-configuration to 2.2.2.2 192-168-1-26.cfg Backup next startup-configuration file to 2.2.2.2, please wait…finished
Related commands
restore startup-configuration