free ftp user-ip ipv6

Use free ftp user-ip ipv6 to manually release the FTP connections established from a specific IPv6 address.

Syntax

free ftp user-ip ipv6 ipv6-address [ port port ]

Views

User view

Predefined user roles

network-admin

mdc-admin

Parameters

ipv6-address: Specifies the source IPv6 address of an FTP connection. To view the source IPv6 addresses of FTP connections, execute the display ftp-user command.

port port: Specifies the source port of an FTP connection. To view the source ports of FTP connections, execute the display ftp-user command.

Examples

# Release the FTP connections established from IPv6 address 2000::154.

<Sysname> free ftp user-ip ipv6 2000::154
Are you sure to free FTP connection? [Y/N]:y
<Sysname>