free line

Use free line to release a user line.

Syntax

free line { number1 | { aux | vty } number2 }

Views

User view

Predefined user roles

network-admin

mdc-admin

Parameters

number1: Specifies the absolute number of a user line. The value range is 0 to 65 in standalone mode and 0 to 71 in IRF mode.

aux: Specifies the AUX line.

vty: Specifies the VTY line.

number2: Specifies the relative number of a user line. The value ranges are as follows:

• AUX line—0 to 1 in standalone mode and 0 to 7 in IRF mode.

• VTY line—0 to 63.

Usage guidelines

This command does not release the line you are using.

Examples

# Release user line VTY 1:

1. Display online users.

   <Sysname> display users
     Idx  Line    Idle       Time              Pid     Type
     10   VTY 0   00:10:49   Jun 11 11:27:32   320     TEL
   + 11   VTY 1   00:00:00   Jun 11 11:39:40   334     TEL
   
   Following are more details.
   VTY 0   :
           Location: 192.168.1.12
   VTY 1   :
           Location: 192.168.1.26
    +    : Current operation user.
    F    : Current operation user works in async mode.
   

2. If the operations of the user on VTY 1 impact your operations, log out the user.

   <Sysname> free line vty 1
   Are you sure to free line vty1? [Y/N]:y
    [OK]